Forum Replies Created
-
Posts
-
Re: Servis Caress 900 washing cold
The very low pressure is likely to be the problem. Or the hot fill hose could be kinked behind the machine. Or the hot inlet valve either faulty or its fine mesh filter blocked. Sadly it’s got to come out from where it sits in order to investigate further. 🙁
Re: bosch maxx siemens control board issue
“Black residue” is usually carbon dust from the motor brushes. It gets everywhere especially if the brushes have ever been changed in the past with non genuine brushes.
Re: Neff oven element and top plate falling down
They are prone to corrosion, so you may have to remove the oven to access and sort the fixings via removal of the outer casing?
Re: Accidentally left a teaspoon in the microwave.
Then maybe part fill a mug with cold water and put it on high for 30seconds. If it successfully heats the water then all is well.
Re: Sustained spin on a Bosch WFF 2001
The motor armature has expired. Either a new motor or time to invest in new machine.
Re: customer damages washer and then wants money back
Allsorts wrote:Martin will also be glad to hear this I guess.
It’s fair to say I’m surprised at the outcome but nonetheless delighted, thrilled even.
Re: Bosch Dishwasher SGS53C02GB/08 FD8404
Remove left hand side panel. It’s located in the water inlet matrix.
Re: WTV74103GB/07 starts clicks and then stops
It’s just a bog standard dryer. NTC a common failing as I’m sure you’ve done dozens in the past. Part no: 00613753. Cheap as chips to have a couple in the van.
Re: Bosch SGS6962GB13 bottom tray filling.
gpsmout wrote:Could someone please explain how to access the components desribed here and what tools I might need to complete the unlblocking?
The answer you seek is described in detail at the beginning of the topic. Read it through and do as advised.
Re: customer damages washer and then wants money back
Allsorts wrote:David, let us know how you get on with TS and with the problem if you don’t mind.
Oh yes please David, chapter and verse if you will be so obliging.
Re: How do we connect a new dishwasher?
All are simple for anyone, even a “delivery guy” to connect up. No plumber required.
