Martin

Forum Replies Created

Viewing 15 posts - 661 through 675 (of 25,534 total)
  • Author
    Posts
  • in reply to: Oven not working..grill ok. #449228
    Martin
    Participant

    Re: Oven not working..grill ok.

    superoptom wrote:Tried finding the TOC to no avail. Checked thermal fuse for continuity – no reading. Is it worth changing this? Any ideas where I can find the TOC?

    That IS the “thermal fuse” (aka Thermal Overload Cutout 😉 )

    in reply to: Bosch Wta74200gb/02 belt #449701
    Martin
    Participant

    Re: Bosch Wta74200gb/02 belt

    Don’t hold me to it but I think it is a 7PH 1980 ?

    in reply to: Bosch washers not resetting after F21 error #449339
    Martin
    Participant

    Re: Bosch washers not resetting after F21 error

    Have you tried the ‘Native American rain dance’ whilst touching the relevant knobs? That should clear it 😈

    in reply to: Buying direct from company vs retailer #449672
    Martin
    Participant

    Re: Buying direct from company vs retailer

    No ‘local independent’ is likely to stock them so 169 quid at Currys….Go for it :tup:

    in reply to: Neff Dishwasher Leak – strange place? #449659
    Martin
    Participant

    Re: Neff Dishwasher Leak – strange place?

    Common fault due to the plastic base warping under high temperature washes. The seal between the stainless tank and the plastic tub is not available as a spare part and only using glue/sealant as a bodge fix is the only solution.

    The plastic base is available as a spare part however but involves a major strip down to install.

    An altogether rubbish machine it has to be said 🙁

    in reply to: Electrolux when turned on fan does not always start. #449626
    Martin
    Participant

    Re: Electrolux when turned on fan does not always start.

    A squirt of oil on the fan motor bearings, end of problem 9 times out of 10 😉

    in reply to: Can’t pull out cutlery tray on new NEFF DW #449611
    Martin
    Participant

    Re: Can’t pull out cutlery tray on new NEFF DW

    Two possible ways of releasing the cutlery drawer:

    Get a very long stick/cane or some such to lift the spray nozzle as you slide out the drawer?

    Remove the top basket to access the drawer from underneath and unhook it that way?

    Your photo appears to show that the top spray nozzle somehow has got unclipped as it should be flush with the roof of the stainless tub. Sadly in order to deal with that the drawer has to be removed.

    Final option, contact Neff to get them to sort it as it is under warranty.

    Martin
    Participant

    Re: Oven won’t turned on without turning on one of the left

    mk1008 wrote:I opened up the hobs unit, there is a burned mark on the oven fibre glass insulation. Do you think it’s save to use the oven ?

    If it is brown in colour then very likely it is just staining from an adjacent vent that caused it. A blackened burn mark would indicate something electrical in the immediate vacinity fused at some point.

    Martin
    Participant

    Re: Oven won’t turned on without turning on one of the left

    Someone’s been twiddling with the wiring :snig:

    in reply to: Which Smeg Oven is this #449584
    Martin
    Participant

    Re: Which Smeg Oven is this

    It matters little as you can buy a standard oven sealing gasket (they are standard after all) from anywhere including this website’s own store. 😀

    in reply to: Zanussi WJD 1457 w washer/dryer #449505
    Martin
    Participant

    Re: Zanussi WJD 1457 w washer/dryer

    It should not fill AT ALL!

    It is blocked clearly.

    in reply to: Neff Dishwasher #449579
    Martin
    Participant

    Re: Neff Dishwasher

    It is likely to be one of the following:

    The pump is worn out and needs replacing.

    The non-return valve, that sits between the pump chamber and the drain hose coupling, is blocked/jammed.

    The drain hose has been extended beyond its normal length or terminates above recommended height.

    If attached to sink waste that could be blocked.

    …..or the pump cover isn’t seated properly.

    It’s got to one of the above 😉

    in reply to: logik lftc60w12 oven not switching on #449561
    Martin
    Participant

    Re: logik lftc60w12 oven not switching on

    Clock/Timer auto mode?

    in reply to: Appliance care cover norwich #449565
    Martin
    Participant

    Re: Appliance care cover norwich

    £15 per month to cover all…hmm?

    http://appliancecarecover.co.uk

    in reply to: DYSON CR01 DEMO MODE #449558
    Martin
    Participant
Viewing 15 posts - 661 through 675 (of 25,534 total)