Forum Replies Created
-
Posts
-
Re: Siemens se24m851gb/01 fd8710
The cable harness does come with instructions on how to take the wires OUT of the connector block, not in, using a special tool 00340785) at over 70 quid. 😯
The wire positions however are repeated on the opposite connector block as far as I know.
Re: Bosch SMV69T10GB/16 error lights
smeghead wrote:thanks Martin, Heater tests ok- so do you mean Pump part?
Not sure of motor resistance- any ideas.The flashing LED’s refers to a Heatpump error is all I know so make of that as you will. However the motor resistance is 41.5 ohms or 53.5 ohms dependent on the winding manufacturer (taken from the less than specific manual) 😕
Cr ap machine, cr-ap manual. 😡
Re: NEFF Oven control knobs getting very hot
I’ve no clue what a “lucar’ is and your post was days ago and you’ve probably messed with it more since. But firstly it would help is you gave us the full model number (aka ENr) of the beast. But it does sound to me from what I can decipher that the cooling fan needs replacing.
Re: Oven b905.2ss trips out near 100degrees
I’m guessng we’re talking Baumatic here? Baumatics do have base elements and yes it’s possible there’s issues there. 😉
Re: Siemens IQ300 E15 and flashing tap
Yes Siemens are high priced rubbish these days whilst Miele still produce far better build quality.
Re: sn65m031gb07 dishwasher
Johnnyboy wrote:found that there was heating problem not sure if its the PCB or motor heater or both ??
Please post this stuff in Trade Technical. :lesson:
What resistance readings are you getting from the heater terminals?
Between terminals 2-3 and 3-4 should read 10.5 ?
Between terminal 2-4 should be 21? approxHave you looked for surface damage on the PCB?
Re: Siemens IQ300 E15 and flashing tap
Jonnyboy123 wrote:is it possible water in machine has risen to a high level and overflowed out of the door sides into the base?
More usually it is leak around the fill matrix on the LHS or the tub gasket or even the main circulating pump. Finding the leak can be tricky that’s for sure.
Re: washing machine for tough conditions
wash2016 wrote:Outdoor launderettes exist. .
Not in this country they don’t. Manila, Nairobi, Mumbai and such like yes. Unless that is you refer to the old fashioned dolly paddle and tub outside the back door, now that would work. 😈
Re: Siemens IQ300 E15 and flashing tap
IQ 300 is a series of machines but for more accurate advice we need the model number (ENr) number first. (Etched on the inside if the stainless inner door panel)
