Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: Fisher & Paykel smartdrive 701 error?
If we go with the code you’ve got, there’s a size error fault. What you’ve done for the rest of the lights I haven’t got a clue……..
To cure the size error, you need to go into option adjustment set up. Push and hols “Start”, then push “Power”. Power off, then try it.
Regards,
Penguin45.Penguin45
ParticipantRe: IKEA Whirlpool Dishwasher DWF-417 error
Quite how a Bosch comes to be sold as a Whirlpool with an Ikea badge on it has got to be one of life’s more obscure mysteries…….
Penguin45.
Penguin45
ParticipantRe: Hpt 9506 stat
There were a few different 9506s Tony – it is the catalogue budget model – various timer and module combinations. Date code to identify which one you’ve got…….
Chris.
Penguin45
ParticipantRe: Do you want cheaper fuel?
I take that Reg is known to you, Jim?
Welcome aboard Reg……..
Chris.
Penguin45
ParticipantRe: Brant d/w & washing up liquid
Dash of fabric conditioner kills the froth in moments…….
Chris.
February 8, 2006 at 7:50 pm in reply to: Bosch Washing Machine Enr. WFL2450UK/12 FD 8202 600 259 #163811Penguin45
ParticipantRe: Bosch Washing Machine Enr. WFL2450UK/12 FD 8202 600 259
That’s Mparts price for a gen motor.
Chris.
Penguin45
ParticipantRe: Diplomat select 620 oven door seal- help!
Natty,
Undo the security screw around the edge of the casing, pull oven forwards; the model numbers are on a lablel on the top. It’s worth the effort as spares@ukwhitegoods.co.uk will be able to source the correct seal for you easily.Additionally, the “make it yourself seal kits are very rarely satisfactory.
Regards,
Penguin45.February 8, 2006 at 6:58 pm in reply to: Bosch Washing Machine Enr. WFL2450UK/12 FD 8202 600 259 #163808Penguin45
ParticipantRe: Bosch Washing Machine Enr. WFL2450UK/12 FD 8202 600 259
Motor only, Ash – 141875 £170 list 😯 . £100 from Masterpart.
Chris.
Penguin45
ParticipantRe: Creda Oven
It may even be on the edge of the trim surround at the bottom – you have to look up!
Regards,
Penguin45.Penguin45
ParticipantRe: Reset button/tricity bendix
If the de-fluff doesn’t do the trick, this is the most likely culprit:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=198
Click the link below if you’re not sure how to do this.
Regards,
Penguin45.Penguin45
ParticipantRe: Moved
I think Jim just moved a post and didn’t break anything in the process…. :rotl:
Chris.
Penguin45
ParticipantRe: Ariston Margherita 2000 Problem
Kirk, they’re all “Margy 2000s” – which one have you got? Model number in corner of control panel.
Regards,
Penguin45.Penguin45
ParticipantRe: part no’s please
I can get as far as FS865041 for the grill element, can’t bring it up anywhere…….
Drain pump is 4812 360 18533 – over £65!
Chris.
Penguin45
ParticipantRe: AEG L76800
Incoming……..
Chris.
Penguin45
ParticipantRe: Hotpoint DWT10 won’t fill fully – any ideas?
Most likely a drain pump blockage – the machine (despite its inadequacies) is not old enough for a drain pump failure. Yet. So – pay them the money, or check the link below for an independent engineer.
Regards,
Penguin45. -
AuthorPosts
