Forum Replies Created
-
Posts
-
Re: Bosch Display Module
Bosch sell boards. Electronics suppliers sell components. As a repairer, I don’t have time to search for individual components. Radio Spares, Maplins, CPC, Farnells and the rest are the places to look.
Penguin45.
Re: White Westinghouse FE561BEX Oven
040199009943R – base element.
040199009932R- fan element.Take your pick.
Chris.
Re: White knight wk100.2 bits
You’ll get the part numbers of the BSH site. You will need the full eNr number as there are early and late versions.
Chris.
Re: HEC 12ESM Dishwasher
HEC = Hong Kong Electric Company = Haier/Midea. Personally, I’d refuse the job. I do have some standards to maintain.
Chris.
Re: hotpoint wd 640
eng14 wrote:thinking main board emw
Yup. Assuming no earth leakage anywhere, it ain’t “logical”, so pcb.
Chris.
Re: Smeg DF614WE dismantling probs to replace waste hose
Lower front cover plate off, push off the centre of the base panel. Lean the machine back, undo the screw on the pump, push it off and let it hang through the base for complete access.
Power off first.
Penguin45.
Re: Replacing bearings and seal in Beko WMA 765s – help need
Hard work one, this one. Front of casing off, tank out and split is the short answer. Take lots of pictures and make diagrams.
The bearings themselves are knocked out with a large hammer and a drift – the hardest part of the job is to persuade the bolt out of the pulley.
Penguin45.
Re: Beko WMA1512W drum not spinning
Carbon brushes in the motor? First place to look. Bit of info HERE.
Power off first.
Penguin45.
