PINKY

Forum Replies Created

Viewing 15 posts - 136 through 150 (of 260 total)
  • Author
    Posts
  • in reply to: Neff S544X2UK/01 #269248
    PINKY
    Participant

    Re: Neff S544X2UK/01

    John your a no’s missing. Could it be s5443x2uk01? its the nearest i can get..

    no1= grey

    no4= orange

    no2= spare

    no3= brown/white

    Pinky

    in reply to: Creda W200FW Door locked light flashing #140135
    PINKY
    Participant

    Re: Creda W200FW Door locked light flashing

    Guys have this fault on Creda w220vw. Door light flashes after a few seconds of pushing start button. Does not lock door. Have changed door lock and checked all main components and wiring loom. From the previous posts are you saying its the pcb? Visually looks fine

    Cheers Pinky

    in reply to: FRIDGE SPARE #257335
    PINKY
    Participant

    Re: FRIDGE SPARE

    cheers. have you got a number for them. their website has no number and 118500 have no listing for them.

    in reply to: Bosch Dryer WTL6102GB #256476
    PINKY
    Participant

    Re: Bosch Dryer WTL6102GB

    Should have asked. Is it showing any fault codes? Normally filter/ finish light flash

    in reply to: Bosch Dryer WTL6102GB #256475
    PINKY
    Participant

    Re: Bosch Dryer WTL6102GB

    Are you leaving it long enough john? Every time you open the door and then press start it carries out checks the load before heating. Just a thought.
    The sensor in the door vent is another option. accessed via the r/h side panel

    in reply to: Bosch WVTI2840GB/03 fault code E14 #256478
    PINKY
    Participant

    Re: Bosch WVTI2840GB/03 fault code E14

    The ntc will give you a problem on any program including spin!! The

    in reply to: Bosch WFD2072GB/05 #256511
    PINKY
    Participant

    Re: Bosch WFD2072GB/05

    All you need is the screws to refit the two halves. No special tools required other than torx screwdriver bit.

    Much better than a wma unless it the Waa cheapy. in and out within the hour!!

    in reply to: oven door hinges #255652
    PINKY
    Participant

    Re: oven door hinges

    Ah no sorry steve!! they look like standard style hinges fitted to the door with one top face mounted screw and two face mounted screws either side of hinge. there is a middle section of glass in the door which is held in place by a frame that the hinge slides into. I know i’ve seen these before but I’m f***ed if i can remember where!!
    dan

    in reply to: heres a new one for ya!! SAMSUNG SR-S2028 #248732
    PINKY
    Participant

    Re: heres a new one for ya!! SAMSUNG SR-S2028

    My initial thoughts confirmed! cheers Pinky

    in reply to: cda cw495 #241812
    PINKY
    Participant

    Re: cda cw495

    cheers!

    in reply to: cda cw495 #241810
    PINKY
    Participant

    Re: cda cw495

    hi Martin, yeah im looking for the door lock and the user pcb on left of door. cheers

    in reply to: zanussi zwf1631w #234985
    PINKY
    Participant

    Re: zanussi zwf1631w

    Cheers Baron. Said to customer to prepare for bin! New appliance me thinks

    in reply to: Reliable subby required!! #220794
    PINKY
    Participant

    Re: Reliable subby required!!

    or e-mail, djc@applianceengineers.com

    someone must want a bit of work!!

    postcodes CM,CO,RM,IG,SS

    in reply to: miele kf6445 sn-6 F4 error code #220500
    PINKY
    Participant

    Re: miele kf6445 sn-6 F4 error code

    cheers. i thought the miele fault code thread was the washing machine codes?
    which sensor, fridge or freezer. not worked on one of these before 🙂

    in reply to: Is it just me or is anyone else quiet? #414185
    PINKY
    Participant

    Re: Has it gone a bit quiet or is it just me?

    Got to be the worst month in five years here
    Think this is really is the final nail in the coffin!Have been wondering more than once why oh why did i leave the joys of employment to start up my own firm!!

    Pinky

Viewing 15 posts - 136 through 150 (of 260 total)