Forum Replies Created
-
Posts
-
Re: Diplomat ADP8640 (Beko) dishwasher stops ;starts.
PCB fault. It’ll be the 1uf or 1.5uf capacitor (approx 1 1/4″ length next to the relay). Hope that helps!
Re: Bosch WAE24260GB/01
Thanks for the quick response Martin. I did think it may be something like you say but was a bit stumped how the machine had started working again. I tried the machine with the motor disconnected but it made no difference.
Re: PCB Relays
Diagram at bottom of page should make it clear
1&2
http://docs-europe.electrocomponents.co … 02ec08.pdf3. No
Re: Washing Machine Y-Adaptor Troubles
I’ve always had trouble with these. Just pack two rubber washers where the leak is. (usually the inlet side).
Re: Hotpoint DWF31N/29 pcb
Hi, For future reference, equivalent Bosch part number is 484213. May be of use to someone.
Re: Happy New Year
All the best for 2013.
Thanks for all the good work keeping this invaluable site running. 😀Re: de-bore glue
I normally use the nearest thing to hand. A good spray of WD40 to get the bulk of it off. That’s if you’re lucky enough to spot it while it’s still sticky. The rest normally brushes off when it’s dry.
Re: AEG L64840 914524535
Worth checking connections to motor plug. They may look ok, but give each wire a good tug. Hope it works for you.
Re: bosch dryer
Hi, I’ve one with similar problem. Power getting to machine. Turn selector switch to a program, machine is totally dead. Wait and wait :rolls: and wait, then control panel comes to life with an obvious relay click. Press start and all is well. After 5-10 minutes, it all cuts out with no lights or display again. Sometimes it will come back to life after only a couple of seconds of cutting out, then pressing start button begins the program from the begining again. This process repeats over and over. Suspect pcb but at £225, it’s a non starter. Has anyone traced the component that causes this fault.
RickRe: COST OF CALL DIVERT TO MOBILE
I’m with talktalk :rotl: phone and broadband. For an extra £5 a month, you get 1000 minutes of free mobile calls a month.
Re: Hoover VHC391-80 T/D Tech info
Think I’ll have to wave the white flag on this one. No info to refer to 🙁
Re: Zanussi condenser dryer fault codes ZDC67550W
RickT wrote:Search “by brand” in left column. Select Zanussi, scroll down to model and select second model down with pnc number. Scroll down to guide to diagnostics and click “view here in pdf”
Use info from ZWD16581W
What is pro corner ❓
