[robbo1973]

Re: smeg dishwasher

the door shuts ok. it would not if door latch was closed? am i right in thinking this?.

[robbo1973]

Re: a bit of advice

thanks for replies lads i am still weighing up my options on this one and now the landlord is pushing for a long lease.the main problem i am coming up against is answering phone on holiday as i do work for insurance companies who like it answered 5 days 9-5 so an a/phone message they may not like.the option of the girls answering from home is a non starter as i am trying to cut costs as everything else keeps going up!.
i have been reading with interest re smart phones etc as a lot of my work is e-mailed thru.its just a scary step as there is no going back once closed.also trusting another company with your business is a scary thought.

my brain is hurting with the decision so any other advice welcome.
thanks again chris.

[robbo1973]

Re: servis

to reset machine with the power on you turn it to STOP and the light should flash. a lot of these servis machines do empty before filling similair to d/washers. if it is kicking in and out i would prob say board,a lot of strange probs with electronics.

cheers chris

[robbo1973]

Re: servis

sorry hile was supposed to be HOLE 😳 . i just open this up a little to help from getting blocked. the actuators are in a plastic frame which sometimes dislodges you can just push it back down and i tie wrap in place. and yes i disconnect from valve and blow down the pipes you can gen see the gunk which comes out in the drawer.

hope this helps chris

[robbo1973]

Re: service

depends on model,the older ones used an arm the newer ones used 2 actuators mounted on top of the soap drawer which sometimes popped out causing problems,the newest use a double valve with both coils activating at once to divert the water to centre comp.I generally blow down the pipes and also open the hile up inside disp with a small screwdriver or allen key to stop blockages.

chris.

[robbo1973]

Re: Servis M6115 – wash problem

i agree gen pcb on most servis if no motor action detected it skips to end.

cheers chris.

[robbo1973]

Re: pab ltd uk hoods

i need little pcb i expect it comes complete as all wires are soldered so it may be write off.
cheers chris.

[robbo1973]

Re: panasonic nnv673sbbpq

cheers merv any idea on part nos and price cheers chris

[robbo1973]

Re: samsung f/f rs20ccms

change the defrost sensor (yellow wires) very common fault and meter the 2 heaters and o/load and change if neccessary that will generally sort it. sensor part no off top of my head is da97-00006b been modified now has a black end! (ooohh matron) but dont quote me on it.

cheers chris.

[robbo1973]

Re: smeg wd16ba

i priced timer up and by picture and description it comes with power board part no smg691650367. is this correct or i am being a bit slow seems odd to supply timer and sep board.

cheers chris.

[robbo1973]

Re: smeg WM no fill

i had a one before xmas smeg but w/pool dead then it fired up and filled then dead checked carbons pressure system etc it turned out to be front board at the bottom.

good luck chris.

[robbo1973]

Re: samsung rl33bns f/f

take off the freezer cover inside and you will find the baffle top left is frozen up. clear ice from around and remove rubber gasket this will cure problem 5 min job.

cheers chris.

[robbo1973]

Re: smeg wd16ba

thanks for reply when you say the air tube do you mean the pressure switch tube.i took the lid off and blow down it is clear. but surely set to stop the machine should be dead?

cheers chris

[robbo1973]

Re: SERVIS WASHING MACHINE

had this once and it was faulty board.

[robbo1973]

Re: Samsung RS21DCNS

yes same sensor but i would defo check the heater in the fridge had this fault a lot. freezer rises every 24 hours or so.

cheers chris.

[Author]

Posts