robbra

Forum Replies Created

Viewing 15 posts - 586 through 600 (of 1,090 total)
1 2 3 … 39 40 41 … 71 72 73
  • Author
    Posts
  • December 4, 2009 at 2:03 pm in reply to: meggers #303414
    robbra
    Participant

    Re: meggers

    Martin wrote:Should chippies carry meggers on their vans then Rob?

    😛
    Well Martin, I’ve got a saw, tape measure, chisel, mallet and a screwdriver so why not? 😉

    December 2, 2009 at 3:53 pm in reply to: meggers #303412
    robbra
    Participant

    Re: meggers

    Just been to a cocky sod who is a chippy.
    I look after the commercial machines in a rest home(but his wife won’t let him near the Creda 1000)
    Oh! I said do you do insulation tests with your megger then?….What’s that he said. PR*CK I said.
    He didn’t have a clue.

    November 29, 2009 at 3:55 pm in reply to: Servis Module #305207
    robbra
    Participant

    Re: Servis Module

    Module definitely correct. As you will know the module controls everything on this machine and there are no modifications so perhaps it is faulty from new which is not unheard of but unusual. I’ve never come across this particular problem so have suggested all I can.
    Good luck and I will look forward to the solution.
    Rob

    November 29, 2009 at 2:54 pm in reply to: Servis Module #305205
    robbra
    Participant

    Re: Servis Module

    These modules often burnt and if you had to break off the old plastic plug and replace with amp tags then you could have put the wires back incorrectly. The wires will have numbers on them, 1-10 so make sure they are in order. The 1 on the module no. is just the supplier to Servis but if the old module was there from new then you have the right part.
    Rob

    November 27, 2009 at 8:25 am in reply to: Hotpoint DI450UK.C no heat #304951
    robbra
    Participant

    Re: Hotpoint DI450UK.C no heat

    Thanks all,
    Steve, stitched yes, even the replacement is £28.91 with Connect. EMW is £29.90 for repair.
    I think a word with John at MAS is due.
    Rob

    November 26, 2009 at 5:25 pm in reply to: Hotpoint DI450UK.C no heat #304947
    robbra
    Participant

    Re: Hotpoint DI450UK.C no heat

    Thanks Jim,
    The first one. Did you get it from EMW as Connect is £72 +vat?
    Rob

    November 21, 2009 at 6:15 pm in reply to: Oven Sealcone #304391
    robbra
    Participant

    Re: Oven Sealcone

    I use Ambersil but usually take the door off if fitting an element or fan motor.
    Rob

    November 19, 2009 at 7:19 am in reply to: servis cd? #304112
    robbra
    Participant

    Re: servis cd?

    Trouble with this is that it needed to be updated regularly from July 2002 but it updated to pc not to the disc and was stopped about 2006 when Merloni website went live so it is very out of date.
    Rob

    November 16, 2009 at 7:51 pm in reply to: Worst Week Ever #291744
    robbra
    Participant

    Re: Worst Week Ever

    My last week was really good until FRIDAY 13TH, blew head gasket on the van and £300 bill and not completed until next Monday 😥
    Still, I was going to have a week off in December but brought it forward for decorating and tax return 😥
    So, yes, Worst week ever
    Rob

    November 16, 2009 at 3:34 pm in reply to: creda bearings #303497
    robbra
    Participant

    Re: creda bearings

    Should be able to get it from Qualtex but not sure of the part no. Had 2 on the van for about 2 years and used them both 2 weeks ago 😀
    Rob

    November 16, 2009 at 8:01 am in reply to: Thermistors. #303777
    robbra
    Participant

    Re: Thermistors.

    You missed the irony Chris

    November 15, 2009 at 6:30 pm in reply to: Thermistors. #303775
    robbra
    Participant

    Re: Thermistors.

    Martin wrote:
    *     So what do you use to check heater is OK?
    (Maybe you need to produce a second PDF on fault finding!)
    Mike.

    I’m still waiting for the first one………………..it’s been ages 😆

    November 12, 2009 at 4:01 pm in reply to: creda bearings #303492
    robbra
    Participant

    Re: creda bearings

    Nice machines and well worth doing but spider and bearings needed, wouldn’t do without a spider. About 1h 15 and pretty easy. I charge £85 and check brushes too.
    Rob

    November 8, 2009 at 2:24 pm in reply to: Neff fan oven elements #162073
    robbra
    Participant

    Re: Neff fan oven elements

    I know, this one was fitted by someone else 6 weeks ago and refuses to go back but I’ll give 6 months and keep fingers crossed 😆

    November 6, 2009 at 7:34 pm in reply to: Neff fan oven elements #162070
    robbra
    Participant

    Re: Neff fan oven elements

    Hi all,
    Have a half moon element oven and it trips consumer unit but as soon as it is reset it will go again for 5 mins and trip again. Straight away it reads 4 ohms but after 10 seconds is up to 24 ohms so will change the element and hope for the best unless anybody has any other ideas.
    HBN77061GB/01
    Rob

  • Author
    Posts
Viewing 15 posts - 586 through 600 (of 1,090 total)
1 2 3 … 39 40 41 … 71 72 73