robbra

Forum Replies Created

Viewing 15 posts - 601 through 615 (of 1,090 total)
1 2 3 … 40 41 42 … 71 72 73
  • Author
    Posts
  • November 4, 2009 at 8:06 am in reply to: Bosch WAE24162UK/01 strange pump fault #302504
    robbra
    Participant

    Re: Bosch WAE24162UK/01 strange pump fault

    Thanks BSH,
    Is it repairable or a new board?
    Rob

    November 3, 2009 at 6:41 pm in reply to: fgs storad #302530
    robbra
    Participant

    Re: fgs storad

    Try premierheating.co.uk. they seem to stock most parts
    HTH
    Rob

    November 1, 2009 at 7:55 pm in reply to: How its done in Spain #302244
    robbra
    Participant

    Re: How its done in Spain

    And we have a thread just below……………
    Bosch Quality Bearings
    :rotl:

    November 1, 2009 at 10:51 am in reply to: Ariston AWD10 Flashing Update???? #302211
    robbra
    Participant

    Re: Ariston AWD10 Flashing Update????

    Had a couple of these this year and now refuse if it’s eight flashes. I was advised to check that the connections to the board were tight, and checked through the m/c and all was fine so got boards from EMW and fitted them. They started ok but went eight flashes again so it must be something other than the board that didn’t show up. Luckily EMW will take them back for a small fee.
    With the inherent reliability problems on Merloni products I will do some but not the eight flashes.
    This is not a reflection on EMW, who are a real boon for us engineers and their refurb boards are definitely better than the originals, but on Merloni and their electrics.
    Rob

    November 1, 2009 at 10:42 am in reply to: Hotpoint FDW20 #302258
    robbra
    Participant

    Re: Hotpoint FDW20

    Thanks Chris,
    Didn’t know that so it’s change the pcb with the ribbon cable.
    Rob

    October 31, 2009 at 6:41 pm in reply to: Door seal retaining spring pliers #300835
    robbra
    Participant

    Re: Door seal retaining spring pliers

    spimps wrote:Always avoid the threesomes 😀 😉

    I just knew someone wo……………………………….uld 😛 😆

    October 31, 2009 at 4:27 pm in reply to: Door seal retaining spring pliers #300833
    robbra
    Participant

    Re: Door seal retaining spring pliers

    First one I did took an hour involved the customer and her husband 😳 Then read on here about Fairy Liquid, I now put a screwdriver in the door lock and one through the hinge hole and take about 20 mins max.
    Rob

    October 30, 2009 at 4:18 pm in reply to: servis m6815w #302151
    robbra
    Participant

    Re: servis m6815w

    EMW £34.90 +vat inc postage exchange
    0115 9652118
    Good company to deal with

    October 29, 2009 at 4:32 pm in reply to: konka TwinTubs. #300790
    robbra
    Participant

    Re: konka TwinTubs.

    Shouldn’t that be Konkout Kwickry…AhhhhSoo 8)

    October 22, 2009 at 3:59 pm in reply to: Connect Prices #288092
    robbra
    Participant

    Re: Connect Prices

    I know this is going over old ground but:-
    Pyrolitic oven seal
    Connect £29.20+ £5.50 post +vat SRP £41.98 out of stock
    Distriparts £17.35 inc of vat and postage
    Makes me mad to think they overcharge like this.
    Rob

    October 21, 2009 at 7:38 am in reply to: Smeg ovenSE210EB-5 #299989
    robbra
    Participant

    Re: Smeg ovenSE210EB-5

    Thanks Alan,
    Did try the selector but it is a so and so to check
    Rob

    October 17, 2009 at 9:31 am in reply to: Gandh1 #299717
    robbra
    Participant

    Re: Gandh1

    Saw that and thought it was Ghandi for a minute 😳

    October 16, 2009 at 6:44 am in reply to: themes #298774
    robbra
    Participant

    Re: themes

    LJDomestics wrote:lol just fancied a more subtle look to the forums really, bit darker to save the eyes.

    We must be getting old 😕 but I turned the brightness down on my laptop
    and it is better.
    Rob

    October 16, 2009 at 6:42 am in reply to: Panasonic door #299558
    robbra
    Participant

    Re: Panasonic door

    Thanks Merv,
    Brought it home and did it your way starting at the hinge and used a small filler knife and it came apart quite easily so thanks for the advice.
    Rob

    October 15, 2009 at 2:22 pm in reply to: websites #299570
    robbra
    Participant

    Re: websites

    Blimey Lee,
    Lets have a look at it. Whats the url?
    Mines been up for about 5 months and gets around £100 a month but it’s not fancy.
    Rob

  • Author
    Posts
Viewing 15 posts - 601 through 615 (of 1,090 total)
1 2 3 … 40 41 42 … 71 72 73