RocketMan

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 657 total)
1 2 3 … 10 11 12 … 42 43 44
  • Author
    Posts
  • July 11, 2015 at 11:28 am in reply to: Bosch WAS28460GB/08 FD9007 #428729
    RocketMan
    Participant

    Re: Bosch WAS28460GB/08 FD9007

    Thanks for that nomadPaul.

    I’ve tried resetting but it doesn’t work. The query is which board. The one at the front (opeating module) which is the buttoms and rotary control or the one directly behind it which is called the power board. Both look like they could be programmed and or have firmware. I just wanted to order the right one before I shoot off.

    Someone must have repaired one of these?

    July 11, 2015 at 9:12 am in reply to: Bosch WAS28460GB/08 FD9007 #428727
    RocketMan
    Participant

    Re: Bosch WAS28460GB/08 FD9007

    Bump.. Any BSH guys who could help please 🙂

    July 10, 2015 at 10:24 pm in reply to: Bosch WAS28460GB/08 FD9007 #428726
    RocketMan
    Participant

    Re: Bosch WAS28460GB/08 FD9007

    Anyone? Reset procedure doesn’t work, no earth leakage from major components and all wiring looks good. Anyone to help me?

    May 22, 2015 at 12:05 pm in reply to: Bush DW Hose #427312
    RocketMan
    Participant

    Re: Bush DW Hose

    Thanks simon26r, you’re a gent. 🙂

    May 21, 2015 at 4:09 pm in reply to: wd420 all lights flashing rapidly #427498
    RocketMan
    Participant

    Re: wd420 all lights flashing rapidly

    A quick search:

    post400120.html?hilit=c17#p400120

    It works, I’ve repaired numerous machines with this fault.

    May 19, 2015 at 9:41 am in reply to: Miele KFN 8462SD Freezer drain hole blocked #427310
    RocketMan
    Participant

    Re: Miele KFN 8462SD Freezer drain hole blocked

    Getting the ice out of the drain hole and pipe can be problematic. When you get rid of all the visible ice and you’re left with ice in the pipe, put some hot (not boiling) water on it then remove the water (syringe or turkey basters work well) Keep removing the water, adding hot water verbatim until it clears. No use just adding hot water as it won’t get passed the cold water on top of the ice without removing it first. Hope that helps.

    April 11, 2015 at 7:22 am in reply to: CDA V10SS Oven fan element #426382
    RocketMan
    Participant

    Re: CDA V10SS Oven fan element

    Thanks for that. I tried to fit one from van stock but no joy. Lots of suppliers couldn’t help so I measured it up and after a lot of searching, I also came up with 12570030 which is spot on size and watts. I ordered a pattern ELE3955. Also 14-MN-04 Europarts/Maddocks another supplier. You post assures me I got it correct thanks. Anyone know who makes it out of interest?

    March 24, 2015 at 6:38 am in reply to: Very Badly Rusted Cooker #425641
    RocketMan
    Participant

    Re: Very Badly Rusted Cooker

    Thanks guys for the replies. All valid points which support my thoughts I expressed to the letting agents.

    Thanks again 🙂

    February 20, 2015 at 9:11 am in reply to: Cuisina Fridge/Freezer. Warm wet wall in fridge. #424843
    RocketMan
    Participant

    Re: Cuisina Fridge/Freezer. Warm wet wall in fridge.

    Thanks eastlmark,

    There was a switch on the stat. Firstly I thought it might be for cold ambient temperature (similar to some Bosch). It looks like it’s in the off position. When I switch it exposes a red indicator. Instruction manual no where to be found. I’ll try and find one online.

    I suspect you’re correct. Thanks

    January 26, 2015 at 3:55 pm in reply to: Electrolux ESL DW series – access in the base #423830
    RocketMan
    Participant

    Re: Electrolux ESL DW series – access in the base

    You’re correct eastlmark. Plastic clippy things. Still a bit of a pain. Even with the side panel off there was limited access but got there in the end. Thanks.

    January 21, 2015 at 9:33 pm in reply to: Electrolux ESL DW series – access in the base #423829
    RocketMan
    Participant

    Re: Electrolux ESL DW series – access in the base

    Thanks

    January 21, 2015 at 11:17 am in reply to: Electrolux ESL DW series – access in the base #423827
    RocketMan
    Participant

    Re: Electrolux ESL DW series – access in the base

    911939201/ESL6115

    January 20, 2015 at 9:13 pm in reply to: Siemans/Bosch DW Programing Guide Module 00269965 #423585
    RocketMan
    Participant

    Re: Siemans/Bosch DW Programing Guide Module 00269965

    Thanks Martin. Sorry for the slow reply, I’ve been away for a few days.

    January 15, 2015 at 7:47 pm in reply to: Siemans/Bosch DW Programing Guide Module 00269965 #423582
    RocketMan
    Participant

    Re: Siemans/Bosch DW Programing Guide Module 00269965

    Sorry Mark that’s not the correct one. The one I need is for an older DW. SE25235GB/17 with 5 swithces and 6 lights. If anyone can help?

    Thanks

    January 14, 2015 at 5:27 pm in reply to: Siemans/Bosch DW Programing Guide Module 00269965 #423581
    RocketMan
    Participant

    Re: Siemans/Bosch DW Programing Guide Module 00269965

    You Sir, Are a gent. Thanks

  • Author
    Posts
Viewing 15 posts - 151 through 165 (of 657 total)
1 2 3 … 10 11 12 … 42 43 44