Forum Replies Created
-
Posts
-
Re: Zan dishwasher ZDT 312 PNC 91153500801 no heat
Thanks Dave but not received anything. Is it to roger-sly@btconnect.com ?
Re: WMFUG742PUK pressure switch reset or software
Update. Got the customer last night to leave the machine on a programme. He said it did hardly anything for around 20 mins then started filling. He has now done 3 washes no problem. So something learned just need to wait a little longer.
Re: WMFUG742PUK pressure switch reset or software
Hope you’ve got the reset procedure. I know a lot have to complete several times for it to work. My customers machine was working ok before blockage so I suppose a few more attempts is in order.
Re: WMFUG742PUK pressure switch reset or software
By the way. Forgot to say I did try it after removing sock before resetting p switch.
Re: BSH dishwasher Smv50c00gb not heating
Having watched a few of these models they often don’t put the fault code up until the end of the cycle, certainly on the quick wash cycle which should be E09.
Re: BT compensation claim
Thank you very much for your advice. I will get a list of complaint numbers and names ready to argue my case. It looks as though they have cured the problem at the moment, but openreach cant tell BT if they have actually repaired the fault or not, it is crazy. So much for the ombudsman by the sounds of it. When I get more information I will post back to you in case it helps with your case. I’m sure there will be others too.
Re: Beko DSC 64W cond dryer no heat
Thanks Dave again. Looks like I’ll try a heater, much appreciated.
Roger.Re: Miele W864 Nr 00/49952175 brushes
All up and running. You were right I had to use old rubber holders. The brass tabs are not as large on the pattern brushes, I was little bit concerned I could slide the holder in the rubber insert, with quite a bit of pressure I must admit. Genuine would be better but she wouldn’t go for price even with me doing it cheap. The brushes would have been a waste of time without the old inserts, but at least the angle on the brush is correct and it runs sweet even from first go. With your help and a look on u-tube so I knew what it all looked like I’ve got a happy neighbour! Always a good thing! Cheers.
Re: Miele W864 Nr 00/49952175 brushes
Thank you Dave for taking the time for such a reply. Have ordered brushes hopefully get back on the Road soon. Cheers.
Re: Bosch washer – WAQ28461GB/12 – bearings shot
Bosch have had problems with WAQ Range. Tell customer to contact Bosch, they are offering a 70{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} discount on repair. You could push for more I suppose. Problem now cured apparently.
Re: WMFG8537GUK Hotpoint steam washing machine heater
ive fitted a couple of these, the heater should be the same as the original with thermistor and collar fitted. sounds like you may have the wrong heater?
Re: ISE 10 vented dryer model DV06
Thank you very much Steve. Think I have a zanussi 1975. At least I know the right way to go in now. Cheers.
Re: Bosch WAE24366GB/23
You may have to check but I think this is normal. I have a Bosch and if I choose a long 60 degree cotton wash without speed perfect selected it shortens the wash if not a full/heavy load, after about 30 mins. I think they calculate the load via motor torque like so many others these days. Either that or mine also has a fuzzy logic fault.
