scots

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 202 total)
1 2 3 … 11 12 13 14
  • Author
    Posts
  • February 15, 2007 at 7:22 pm in reply to: Bosch WTA3200GB/09 #204428
    scots
    Participant

    Re: Bosch WTA3200GB/09

    Hi Simon

    I have been working on a prob with one of these machines, does your machine heat in both directions?

    Does your dryer have a manual time setting to see if the prob is to do with the sensing for dryness.

    I am sure youve thought of this but just in case, make sure there is a damp load in the dryer when checking.

    February 9, 2007 at 1:58 pm in reply to: Bosch tumble…WTA3204GB/09 #196641
    scots
    Participant

    Re: Bosch tumble…WTA3204GB/09

    I will not give up…

    Will let you know when I repair it.

    Brian

    February 9, 2007 at 1:03 am in reply to: Bosch tumble…WTA3204GB/09 #196639
    scots
    Participant

    Re: Bosch tumble…WTA3204GB/09

    Hi Rob

    Just read thru your fault, this is identical to what I have. I tested everything and came to conclusion it has to be PCB….WRONG 😳 I tried new one and still the same fault. I suspect it can only be thermister… but which one, there are 2. One on exhaust and another to protect heater?

    Can you let me know how you got on

    Thanks
    Brian

    January 23, 2007 at 11:53 pm in reply to: Old Philips d/w #201145
    scots
    Participant

    Re: Old Philips d/w

    Cheers Keith, any help welcome, I assume you mean high pressure pressure switch?. I remember them from my Hoover days, no easy way to test that one.

    Brian

    January 17, 2007 at 6:03 pm in reply to: Indesit WIL103UK #201179
    scots
    Participant

    Re: Indesit WIL103UK

    Hi Just a thought, how did customer check power to mains filter. I remember a customer swearing that power was at machine. When I tested there was no neutral, the guy had used a mains tester you know the screwdriver kind.

    Apart from that it sounds like main PCB

    Brian

    January 17, 2007 at 5:48 pm in reply to: Old Philips d/w #201143
    scots
    Participant

    Re: Old Philips d/w

    Thanks for all the replys, wires in door were the first thing I checked, shame as its nice and easy….as this machine has 3 yes 3 pressure switches (and I’ve made sure all the tubes were clear) its really awckward trying to trace wires thats why I hoped I could get a diagram.

    Thanks again all

    January 17, 2007 at 5:02 pm in reply to: Old Philips d/w #201139
    scots
    Participant

    Re: Old Philips d/w

    Thx for reply pup, no blockages there though..

    Brian

    January 5, 2007 at 12:09 am in reply to: Diplomat APM8722 #199526
    scots
    Participant

    Re: Diplomat APM8722

    Cheers Mark, anything will help..wished I’d never started on it, but then It looked very obvious.

    Cheers Brian
    brian@maglin.co.uk

    January 4, 2007 at 4:11 pm in reply to: kirby g4e #199248
    scots
    Participant

    Re: kirby g4e

    Hi we get them from Qualtex pk No. FLX63, hope this helps

    Brian

    November 29, 2006 at 6:10 pm in reply to: Smeg cooker A42-2 #196599
    scots
    Participant

    Re: Smeg cooker A42-2

    Thanks Andy, have ordered up today

    Brian

    November 10, 2006 at 12:04 pm in reply to: Zanussi FJR1254W Error Code E90 #194868
    scots
    Participant

    Re: Zanussi FJR1254W Error Code E90

    Worth a go, will try next week and post the result.
    Thanks

    November 10, 2006 at 12:08 am in reply to: Zanussi FJR1254W Error Code E90 #194866
    scots
    Participant

    Re: Zanussi FJR1254W Error Code E90

    I have the same prob E90. its intermettent, when I tried, it started within a second or so.
    Reset and worked ok, functionally tested and ok… WEIRD!!!
    Anyone else got any ideas?

    November 8, 2006 at 8:51 pm in reply to: Zanussi ZT102 #193905
    scots
    Participant

    Re: Zanussi ZT102

    Thanx for all the help, ended up it was the timer, EMW as always gave me another timer and worked ok

    Brian

    November 6, 2006 at 7:05 pm in reply to: Indesit WD14UK #194482
    scots
    Participant

    Re: Indesit WD14UK

    Seem to remember had same fault a few months ago, like you I was on module route. Can’t recall why I checked brushes but did and that was it. Worn brushes.

    Brian

    November 1, 2006 at 5:17 pm in reply to: Zanussi ZT102 #193903
    scots
    Participant

    Re: Zanussi ZT102

    Hi Martin.
    I have fitted both from EMW (normally fix first time). 1st timer would not stop at the end of the cycle, it would move on into another program. The second one I fitted has this problem of no supply to cold valve when on cond rinse it just stops. The other rinses are ok, strange as the only difference I can see is the cam moves the fill nozzle onto the cond compartment.
    The nice lads from EMW are sending me another, hopefully I can put this to bed.

    Thanks again for reply Martin

  • Author
    Posts
Viewing 15 posts - 166 through 180 (of 202 total)
1 2 3 … 11 12 13 14