Forum Replies Created
-
Posts
-
Re: Beko Washing machine tripping electric
Yes heater likely has an earth fault, do not use it with earth disconnected!
Power off of course if working on it.Re: BEKO DCU8230 Sticks in program
When you say it will not stop, some have anti-crease function that continues to turn drum every 30 sec’s or so when program has ended. May not be a faault. Sticking in programmes, does it heat, not heat, not turn?? There is diagnostics for them, but meter the heater first, i’ve come across many of them with heater down to earth at NTC of heater, mostly caused by dampness from not cleaning the condenser.
Re: program fault ?
Some of these dishwashers need a conversion kit fitted to them to prevent the anti-overflow problem you describe.
Its a job for an Engineer to be honest & involves changing pressure switch, valves, hoses & fitting anti-interference components in the circuit.Re: Beko cool64bfd compressor wont run
Oliver, perhaps it’s time to ask an Engineer to look at it, to be honest when I see posts from someone who thinks there is a motherboard in a refrigeration product you can tell that perhaps their knowledge of such items is limited.
If compressor is stopping after a few seconds it will most likely require a compressor replacement. This is something that can only be done by an engineer with the correct knowledge & equipment.Re: Belling range 112SSS
Just parts diagram available for it on my tec’ info’, its a 10 y’old product, whats the issue you have.
Re: John Lewis (Electrolux) Heat Pump Dryer JLTDH14
In these dryers the conductivity sensors is made up of two brushes, the two halves
and the drum & the electronics for measuring.
E32 means that in diagnostics at test position 7 has not noticed the short circuit of the drum (that YOU the engineer should put in place) if a short circuit is not noted in the 4 second duration of the test it will show E32.Re: Stoves range induction fault.
Worthwhile checking the terminal block for loose/poor connections. Have seen many of these with loose links.
Re: Cda648fw/1 beko fridge freezer
Maybe its getting low on gas & running continuously, is it actually below zero degrees in fridge or just a lot of frost on back wall?
Re: Belling oven noise.
Fitted on all ovens, its on Gas & Electric.
Have checked the model number you provided +another 4, its the part number listed as cooling fan for that product.Re: Beko DRCT lights
Maybe heater low resistance to earth at the NTC. Power off when checking of course.
Re: Belling oven noise.
If knocking, check its not hitting off cable or something behind oven, they’re normally not overly noisy, vibration is from actual tin on back of oven shaking, .
Not near enough fours in the model number, its 444447311..
part num’ 082233401
like this one
http://shop.ukwhitegoods.co.uk/catalogs … =082233401
