[Seamy]

Re: ZANUSSI ZNB4051 FRIDGE FREEZER REPAIR ADVICE PLEASE

Fans are prone to failure. The rattling you describe could be the fan knocking off ice. The defrost controls may be faulty & the appliance is not automatically defrosting as it should.

[Seamy]

Re: belling main oven selector switch

082956100 SWITCH m/ov 42.02900.033

[Seamy]

Re: Zanussi ZWF12070 Washer Not Heating

The correct model number is ZWF12070W1, i’d try changing the heater first, theres an inbuilt fuse in both legs of the element & they could be going open circuit under load. Depending on which NTC is used they should give approx’ readings of 6400 ohms at 20C it should go down to 600 ohms at 80C, the reading you posted looked right enough.
What fault code did you get on the appliance?

[Seamy]

Re: zanussi fx1465w

Would suspect its heater problem, they throw up E6? fault codes.

[Seamy]

Re: beko tumble dryer belt 4phe226

Part number is 492204403, Google showed up they are available here —-
http://www.4beko.co.uk/search.pl?query=492204403

[Seamy]

Re: Help – Knob positions on New World Debut single oven

Why not ask the manufacturer if the fascia panel is available as a spare part, with it fitted all the function positions will be visible again.

[Seamy]

Re: Beko WMA765S 1L and 1200 spin flashing

1L = P.C.B faulty

[Seamy]

Re: Miele WS5073

Check pressure vessel for blockages, whats a door sneck?

[Seamy]

Re: Miele W980 Washing Machine

Have had bad solder dry joints on the on/off p.c.b cause the problem described. Check edge connections also, there should be a circuit diagram in the machine to help you trace supply.

[Seamy]

Re: Torroid filter???

Product code is 7144381100
Part number for Torroid filter is 2889500100
What was the fault that required a P.C.B to be fitted in the first place.

[Seamy]

Re: Miele t430

Yeah, it will do this if it senses high temperature. NTC if faulty could be the source of the problem, but check the ducting & fan for blockages also.

[Seamy]

Re: Torroid filter???

Model number & 10 digit product would be a help, can check the technical website to see if there is a bulletin on the problem.

[Seamy]

Re: Miele Novotronic W970 – Intermittant "Check Inlet" light

The machine is most lkely gunged up, the water level detecting is not working properly, run a cleaner through it to see if it helps.

[Seamy]

Re: Electrolux fridge freezer ENB40400X 925034424-01

2425163017

[Seamy]

Re: miele T7644c tumble dryer cuts out

yes, they’re the sensing brushes, so if they don’t sense (damp clothes) they shut down the heating

[Author]

Posts