Simon46

Forum Replies Created

Viewing 15 posts - 2,056 through 2,070 (of 2,216 total)
1 2 3 … 137 138 139 … 146 147 148
  • Author
    Posts
  • March 30, 2005 at 11:32 pm in reply to: Currys couldn’t install? #129137
    Simon46
    Participant

    Re: Currys couldn’t install?

    Am charging £85 to deinstall integrated dishwasher dispose of and fit new one delivered by comet. Customer has been billed for removal of old appliance (as long it is sitting in the middle of the kitchen) but has not been told verbally that the door panel has to be removed and hoses disconnected.

    March 30, 2005 at 11:10 pm in reply to: INDESIT WI RANGE, NON STOP TIMER CLICKING ROUND?+moan time #130365
    Simon46
    Participant

    Re: INDESIT WI RANGE, NON STOP TIMER CLICKING ROUND?+moan ti

    Yes repaired a lovely 9525 that i fitted bearings to 3 years ago. a set of motor brushes cured the no spin fault. Customer knows from her family/friendsthat their new machines are not lasting (one has had 6 callouts from new)and she will pay anything for repair on the 9525.

    March 30, 2005 at 10:54 pm in reply to: Why does my Tumble Dryer stops after 2 mins? #130398
    Simon46
    Participant

    Re: Why does my Tumble Dryer stops after 2 mins?

    The relay is failing.

    March 28, 2005 at 7:34 pm in reply to: T620CW Cutout #130175
    Simon46
    Participant

    Re: T620CW Cutout

    The relay it will be!

    S.

    March 26, 2005 at 10:27 am in reply to: Bosch Dryer WTA3003GB/17 Drive Belt broken #129967
    Simon46
    Participant

    Re: Bosch Dryer WTA3003GB/17 Drive Belt broken

    For example went to one yesterday. Shredded tissue paper everywhere had ripped front support bearings out of drum housing.

    Simon.

    March 25, 2005 at 8:23 pm in reply to: Hotpoint Mistral Plus (model 8596P) Fridge Freezer Temp Prob #129988
    Simon46
    Participant

    Re: Hotpoint Mistral Plus (model 8596P) Fridge Freezer Temp

    Can the fan be heard running in the freezer. Opening and closing the fridge door will change the state of the fan operation (fridge light on or off)?

    March 25, 2005 at 12:26 am in reply to: hotpoint armatures #129539
    Simon46
    Participant

    Re: hotpoint armatures

    Yes genuine Hotpoint laminated brushes.

    S.

    March 25, 2005 at 12:11 am in reply to: hotpoint armatures #129537
    Simon46
    Participant

    Re: hotpoint armatures

    How is everyone finding the brownish coloured ones?

    S.

    March 24, 2005 at 7:57 am in reply to: Bosch KGV3120GB/01 compressor wont run #129662
    Simon46
    Participant

    Re: Bosch KGV3120GB/01 compressor wont run

    This is the one that puts the fridge light on dimly if ouside is too cold. It is in the house. Have ordered board from QER. Hopefully compressor is not blown. Will post findings.

    Regards
    S.

    March 21, 2005 at 10:22 pm in reply to: Tumble dryer exhaust stats #129516
    Simon46
    Participant

    Re: Tumble dryer exhaust stats

    Thanks for info SparkyP. Already sorted one out.

    Regards
    S.

    March 21, 2005 at 8:51 am in reply to: After 6pm calls #129402
    Simon46
    Participant

    Re: After 6pm calls

    It suits me. I am in the middle of doing up house and drop one toolbox to pick up another when the phone rings. Also have just moved county to be nearer to family so am starting again business wise. So i am quiet until the word of mouth machine gets fully operational. I have to grab everything that comes my way or someone else will or customer makes trip to comet. When established (again) this will change.

    Regards
    Simon.

    March 21, 2005 at 8:31 am in reply to: Tumble dryer exhaust stats #129514
    Simon46
    Participant

    Re: Tumble dryer exhaust stats

    Thanks for info Chris. Have also seen them go on the 2 year old whirlpool vented dryers as well. Not had one yet on the older models though.

    Cheers
    S.

    March 13, 2005 at 9:08 am in reply to: indesit cooker not heating up #128575
    Simon46
    Participant

    Re: indesit cooker not heating up

    The grill should work still. The conventional oven setting may work(top/bottom elements) Does the red light to say that the oven is switched on come on? This is the one that goes off when the oven is hot.
    There is no service booklet for these. It is possible that something else may have been damaged when the fuse blew. Pop up your postcode or check directories section on left for a repairer.

    Regards
    Simon

    March 12, 2005 at 4:49 pm in reply to: Indesit DG6100/1 Dishwasher door switch #128615
    Simon46
    Participant

    Re: Indesit DG6100/1 Dishwasher door switch

    Thanks Chris. Will do.

    S

    March 12, 2005 at 8:28 am in reply to: indesit cooker not heating up #128573
    Simon46
    Participant

    Re: indesit cooker not heating up

    It is possible that the fan oven element has failed. If you are going to look yourself Please remove power supply to cooker. Otherwise if you click on the red toolbox there may be a repairer in your area.

    Regards
    Simon

  • Author
    Posts
Viewing 15 posts - 2,056 through 2,070 (of 2,216 total)
1 2 3 … 137 138 139 … 146 147 148