smartin

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 536 total)
  • Author
    Posts
  • in reply to: Hotpoint DWF70P #279781
    smartin
    Participant

    Re: Hotpoint DWF70P

    ive got 3 pcb and smart cards to fit tomorrow 😆

    in reply to: Beko freezer TZDA524 warming #279890
    smartin
    Participant

    Re: Beko freezer TZDA524 warming

    24 hours minimum with freezer door left open

    in reply to: tecknics range cooker #279511
    smartin
    Participant

    Re: tecknics range cooker

    from memory i think its the one with criss cross wire across the back that holds the wadding in place, so be carefull when re-assembling it for stray wires shorting against live wires 😉

    in reply to: Hoover CNA 145 Washer #279797
    smartin
    Participant

    Re: Hoover CNA 145 Washer

    are you sure the customer is selecting programmes where it allows you to use them,ie: it will only allow you to select an option which is allowed for that programme, which will explain why it is only working sometimes.

    in reply to: Whirpool Fridge Freezer S20ERSS2V-A/G flashing display #279703
    smartin
    Participant

    Re: Whirpool Fridge Freezer S20ERSS2V-A/G flashing display

    i think all the information you need has been covered to death in these forums, you will only be told what has already been mentioned.

    in reply to: Problem with EBD WA 2216 #279680
    smartin
    Participant

    Re: Problem with EBD WA 2216

    just for the future if you do get this repaired or buy a new one, overloading it causes clothes to overhang and catch the door gasket, as it is turning it rips pieces off the gasket and damages the clothes as well. also it wont wash to well or could even be the cause of the problem you have if clothing has stopped the drum.

    in reply to: New Bosch dishwasher heat pump #278712
    smartin
    Participant

    Re: New Bosch dishwasher heat pump

    no seriously last engineer ordered a pcb and sensor and surprise surprise it still didnt heat, so i set about attacking it with my meter but checked out ok so unless im missing something i ordered the heat pump.

    in reply to: New Bosch dishwasher heat pump #278711
    smartin
    Participant

    Re: New Bosch dishwasher heat pump

    it werent heating lol

    in reply to: Problem with EBD WA 2216 #279679
    smartin
    Participant

    Re: Problem with EBD WA 2216

    yep defo 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} servis they went out of business befor xmas but my 1st post stands as to what is wrong.

    in reply to: Problem with EBD WA 2216 #279677
    smartin
    Participant

    Re: Problem with EBD WA 2216

    try posting a picture of it then we might be in a better position to say 😉

    in reply to: Problem with EBD WA 2216 #279675
    smartin
    Participant

    Re: Problem with EBD WA 2216

    looks like a servis number to me, if it it then it is probably a pcb and/or motor.

    in reply to: New Bosch dishwasher heat pump #278709
    smartin
    Participant

    Re: New Bosch dishwasher heat pump

    🙁 4 month old dishwasher need i say more

    in reply to: Samsung B1215J Thermistor #279650
    smartin
    Participant

    Re: Samsung B1215J Thermistor

    the error codes are there to point you in the right direction, i would not take them as gospel personaly i would unplug it and have a look around inside, a loud pop would lead to physical signs of damage,the thermistor will be on or next to the element.

    in reply to: New Bosch dishwasher heat pump #278707
    smartin
    Participant

    Re: New Bosch dishwasher heat pump

    went to one today that needed a heat pump ordering, a very quiet dishwasher, parts easily accessible as well

    in reply to: hotpoint wt741 #279296
    smartin
    Participant

    Re: hotpoint wt741

    lol there was a very interesting thread in public forums about a zanussi sealed drum good reading if you fancy a laugh 😉

Viewing 15 posts - 91 through 105 (of 536 total)