Forum Replies Created
-
Posts
-
Re: lg gr-l206cvqa
yes its a fault code it means abnormal freezing motor, from memory the fan motors on these are variable speed and when they fail they go flat out and freeze everything.
Re: Hotpoint WD440 Power Module Situation
no less than 4 smartcards for this machine
C00262287= cold fill
C00262299=h/c fill
C00263494= ceset motor
C00267859= new heater boxmine field as it may even need a wiring change dependant on the module fitted
Re: Bosch sparepart alternative?
in the uk the spare part is £13 considering the exchange rate thats about 13 euros, 0844 8928921 bsh appliances
Re: Bosch sparepart alternative?
good idea 😥 then if you get the specks wrong and someones dishwasher catches fire because of it then they can sue you.
Re: Indesit WN 1062 leaking water
chances are that 1 of the coins has hit the drum and fractured it, remove mains plug and have a good look around inside, the model number is wrong by the way
Re: VHD 814 vision
F03 failed to drain=blocked filter bottom left hand side of machine, but you cant just pull it straight out as there is water left in the machine and it will be on the floor in a few seconds, try and pull machine out tilt machine back so you can get a bowl under filter and slowly empty water out into it.
Re: Whirlpool AWM 6140/3 banging around.
check the suspension legs, there set up and fixing arrangment are complex to say the least, i went to 1 the other day same thing noisy as hell and all i could find was the excessive movement in legs, have ordered a pair and see how it goes.
Re: candy cna145 w/m
need a bit more than 2 go on im affraid like what lights are flashing and how many times, 2 hours on a 40 wash is about right.
Re: humidity sensor
yep that is the problem, replace that and all should be well, the pcb measures differing (very low not harmfull) voltages between two points via the wet washing, as the clothes dry so the voltage changes and the copper is a pick up.
Re: SMEG HINGES FOR A1-5
only other thing is why did customer take them out i wonder, it could well need female hinges as well
Re: SMEG HINGES FOR A1-5
hi 323 here, you have put pins in the hinges befor fitting to cabinet or did they already have them in ?, if not check out ib part 2 in tech data.
