[spanishwhite]

Re: Whats the most annoying thing customers do?

0730 this morning phone call.
caller,”is that steve?”
me “yes”
caller “you fix washing machines don’t you”
me “yes”
caller “well my cement mixer isn’t working I think it’s the motor,can you come round and have a look?”

[spanishwhite]

Re: dispenser drawer not working correct, only fill 1st comp

Bompani I believe is an Indian made machine it is unlikely that anyone will have any tech info on it.
If you are in the UK your best bet would be to get an engineer to look at it.

[spanishwhite]

Re: ISE 1606W Spin speed

ALL machines will increase their spin speed gradually,this allows as much water as possible to be removed from the clothes before the machine goes into max spin.

[spanishwhite]

Re: whirlpool adp262wh overfilling

Just realised,it’s a Beko with a whirlpool badge.

[spanishwhite]

Re: whirlpool adp262wh overfilling

Thanks Mike,having read your post I spoke to customer and have ordered a new one just in case.(they are paying)
Steve

[spanishwhite]

Re: whirlpool adp262wh overfilling

Hi Dave,no fault codes or blockages,however when i took the inlet valve off it was connected to what looks like a pressure switch.Took it apart gave it a clean.Washer now seems to be working fine.Fingers crossed.
Steve

[spanishwhite]

Re: VHD8142 flashing

I’ve had this twice before,both times it was the heater.

[spanishwhite]

Re: Indesit d61 D/W

Thanks Bob

[spanishwhite]

Re: Thomson TWF1206 ES

Other end of the country near Granada in the mountains

[spanishwhite]

Re: Thomson TWF1206 ES

Unable to get a manual,however this machine doesn’t normally have a childlock.It does have a delayed start programme.
Not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but think it’s a Fagor/brandt

[spanishwhite]

Re: Thomson TWF1206 ES

As far as I know Thomson are French,I did have their website so i’ll dig around later.Had the same problem,but a different model just had to press the childlock once to release it.

[spanishwhite]

Re: Bosch Maxx WFL2260 – Rapid tapping when spinning

The spoked wheel you can see at the rear is the drum pulley.
The support spider is inside the outer tub.

[spanishwhite]

Re: Bosch Maxx WFL2260 – Rapid tapping when spinning

It COULD be the drum support spider,which is inside the tub.
Normally when they fail it will give a rapid knocking when spinning.

[spanishwhite]

Re: hoover hnl 662-80

Thanks
steve

[spanishwhite]

Re: Zanussi 1020w stoped Spining

Just check the brushes,no need to change the motor.

[Author]

Posts