[subs]

Re: Hoover Condenser Dryer

Thanks Martin!

Subs 😀

[subs]

Re: Compressor Alternative

Thank you all for your input. Thanks also for your concern but ive replaced quite a few compressors now and done a few retrofits. I also explain to cust that opening system can sometimes create problems such as blockages which are difficult to remedy, so there is an element of risk involved. I told this cust that i would try and get him another brand of compressor as Lux one would be expensive and it only lasted 4 years anyway. He was morer than happy.

Thanks

Subs

[subs]

Re: Compressor Alternative

Dales-Electronic wrote:Looks like its a fifth of a HP so you could use anthing with that size Aspera NB1116 etc, but to be sure I could do with the internal capacity in litres.

I was thinking myself about a 1/5 HP. Ill try and get the capacity. Spoke to Lux, apparently its Australian made, and they want £200 for compressor 😆

Thanks

Subs

[subs]

Re: Brandt Dishwasher Leaking

Thanks for replies. Im hoping i wont have to go back to this one. I did have the lower spray arm off to remove a lemon pip lodged in hole but must say did not check for split.

Subs

[subs]

Re: Bosch Dishwasher (heater replacement)

Thanks very much Martin for your detailed reply.

I can now go and tackle this job with a lot more confidence armed with this info.

Subs:D

[subs]

Re: Bosch Dishwasher (heater replacement)

Thanks Jim!

Subs 🙂

[subs]

Re: Hotpoint Future F/Freezer

This turned out to be an FF model with the thermometer symbol flashing on the display, warning of high temp in freezer ( due to lack of gas):rolls:

Subs

[subs]

Re: LG Dishwashwasher

Hi Lerch, the product number is 3850ED3005L. I had a good look at the module but could not see any obvious signs of damage.

Subs

[subs]

Re: hoover fridge freezer

Any chance of a little feed back as to what the problem was and how you cured it?

Subs 🙂

[subs]

Re: Bosch Tall Freezer

Thanks for reply Simon!
From reading through previous threads (there is even one of my own in there from a year ago), it seems that if everything checks out, then melting the ice is first port of call. If called back soon after then change front PCB.

Subs

[subs]

Re: Zanussi Washer E90

Thanks lads!

Subs 🙂

[subs]

Re: Bosch Fridge Freezer

smartin wrote:there is a mod kit for these to stop this happening 3 parts are needed and all need to be fitted,module,insulation plate( sits on top of evaporator) and a drain heater kit (does exactly wot it says on the tin lol) cant remember part numbers off the top of me head but il sort them out a bit later smartin

😮

Blimey! Thats some modification kit. Thats like buying a new car and having to to cure a design fault by replacing the engine, gearbox and rear axle.

Subs

[subs]

Re: Candy Washer CN120T

Hi Martin,
I had the board out and had a good look but could see no blown triacs or dry joints etc, thats why im in two minds about it. I think i might have another look at the motor.

Subs

[subs]

Re: Lux electric oven

Thanks very much for the info.

Subs 😀

[subs]

Re: Hotpoint WF310P

As someone who always trys to help the customer out, i did explain that it was covered with a Hotpoint 5 year parts warranty and although the £90 charge was a lot higher than my rate, in this instance, (if she forgets about the fact that the m/c is only 18 months old), she was getting quite a good deal.

Subs 😉

[Author]

Posts