[suedehead1]

Re: Hoover AL130

random running around i agree is a timer fault stopping before the end of the program could just be a blocked filter.

[suedehead1]

Re: Ariston Margerita AWD12 – noisy spin

it sounds like a bearing to me.

[suedehead1]

Re: Hoover AL130

whats a potentiometer?
the big knob that selects the programs selects the programs, if you are more specific about what programs are working and which ones are not i am sure someone will help you out.

[suedehead1]

Re: Hotpoint wf540

it sounds like the pcb to me, i usually get one from tony at emw to try it.

[suedehead1]

Re: hoover nextra hnc380

does it have a small pcb behind the facia with an orange relay on it if it does i would try a new one on.

[suedehead1]

Re: Hoover HNWF6135-80

if its dead its the top one i think the bottom one is one of these chopper boards and is only for the motor

[suedehead1]

Re: Gogos Crazy Bones

oh yeah pogs as well i had forgotten about those.
i was really surprised that they had based the size on the diameter of the zanussi sump hose.
those gogos look too big to get down between the drum and the door seal.

[suedehead1]

Re: Gogos Crazy Bones

rolf wrote:Bring back tacos.Those collectable discs. I earned a few quid from them ❗

tacos are mexican food its tazos you are thinking of they were excellent.

[suedehead1]

Re: diplomat HJA8630 dishwasher

thanks for the reply i am going tommorow to get another look at it.

[suedehead1]

Re: diplomat HJA8630 dishwasher

thanks very much for the replies how do you know if it faulty?
i really should avoid these things.

[suedehead1]

Re: Duct Feed Pipe Splitting on Drying Cylce

the cold water valve should have a flow restrictor in the end of it which reduces the amount of water going through the valve as far as i can remember, however if your water pressure is too high that can also burst the hose. when you fit the new hose try the dryer and watch the hose if it starts to swell up, if it does there is a problem and te flow restrictor may have came out.
plug out if working on the machine of course.

[suedehead1]

Re: diplomat HJA8630 dishwasher

i dont like to apperar daft but what is a flowmeter?
and is it repairable or is a new one flowmeter required.

[suedehead1]

Re: Indesit WD12s Module problem

i personally wouldnt put a pcb on it without checking that leak,
if you dont then the board could blow again.

[suedehead1]

Re: diplomat HJA8630 dishwasher

if i put it onto a program it drains then stops if i change the program it fills then stops,
a beko eh?

[suedehead1]

Re: Indesit WD12s Module problem

water leaks from the dryer assembly onto the board and blows the tracks and also can damage any of the components on the board.

[Author]

Posts