superfix

Forum Replies Created

Viewing 15 posts - 346 through 360 (of 865 total)
  • Author
    Posts
  • in reply to: Neff integrated tumble dryer no go #221348
    superfix
    Participant

    Re: Neff integrated tumble dryer no go

    The wires will be for the NTC.

    It may be worth checking the instruction book for “child lock”.

    Amazing how many customers set this unwittingly.

    in reply to: Bosch SGS43T52GB/16 FD 8505 DW #202700
    superfix
    Participant

    Re: Bosch SGS43T52GB/16 FD 8505 DW

    You were right in the first place with the flow meter. Measures the amount of water going in and then kicks motor over (or not in this case).

    No pressure s/w fitted.

    in reply to: Bosch SGS43T52GB/16 FD 8505 DW #202695
    superfix
    Participant

    Re: Bosch SGS43T52GB/16 FD 8505 DW

    Only if they registered it for the second year

    No, they all come with a two year guarantee regarless of registration.

    in reply to: Bosch SGS43T52GB/16 FD 8505 DW #202692
    superfix
    Participant

    Re: Bosch SGS43T52GB/16 FD 8505 DW

    There appears to be some kind of flow switch fitted inline with the inlet valve

    99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain that’ll be the culprit 🙂 .

    BTW with that FD it will still be under guarantee.

    in reply to: Bosch SGV43A03GB No Power #200760
    superfix
    Participant

    Re: Bosch SGV43A03GB No Power

    Did you “code” the module when you fitted it?.

    There should be a coding sheet in the box with the new one. If you haven’t coded the pcb then the programmes may not correspond with the buttons on m/c.

    in reply to: Bosch SGV43A03GB No Power #200758
    superfix
    Participant

    Re: Bosch SGV43A03GB No Power

    Has the m/c been meggered?.

    As Simon said it may well be an earth fault on another component causing the pcb to blow.

    Expensive mistake to make 🙁 . Best call an engineer I think.

    in reply to: bosch classix condenser dryer #202297
    superfix
    Participant

    Re: bosch classix condenser dryer

    Pump blocked, hose to water tray blocked.

    E-Nr would help considerably 😉

    in reply to: Neff dishwasher won’t drain #202208
    superfix
    Participant

    Re: Neff dishwasher won’t drain

    I’d start by bailing out as much water as possible, then removing the drain pump cover at 3 o’clock in the sump

    Try the 9 o’clock position. If you find your instruction book it will tell you how to check the pump 😉

    in reply to: At last!! i found a use formy corgi card!!! #201843
    superfix
    Participant

    Re: At last!! i found a use formy corgi card!!!

    Also good for applying polyfilla and opening stuck washer doors with dodgy bowden cables 😉

    See multifunctional they are 😀 .

    in reply to: Another joke. #137304
    superfix
    Participant

    Re: Another joke.

    Bubba enjoys going swimming at the waterhole, but has never had any luck with the ladies that frequent the place.

    In desperation he asks his buddy Billy Joe “why can’t I get any action with the ladies”. Billy Joe tells his friend “it’s cos of those horrible old baggy shorts”

    Billy Joe says “get yourself a pair of speedo’s that are two times too small and stick a fist sized tater down there, and you’ll get no end of action”

    So next week Bubba turns up at the waterhole in his speedo’s with his fist sized tater in place. But as he walks past everyone he’s amazed as all he can hear is moans, groans and insults.

    Crestfallen he consults Billy Joe to find out what’s gone wrong.

    “Jeez Bubba, I meant down the front”

    in reply to: bosch condenser dryer #201265
    superfix
    Participant

    Re: bosch condenser dryer

    Drum has to come out to access vent stat on this m/c. Side panels not removable I’m affraid

    in reply to: Bosch WNT3250GB/01 drier cuts out. #201136
    superfix
    Participant

    Re: Bosch WNT3250GB/01 drier cuts out.

    Surely the safety stat will only trip out if the temperature in the heater chamber is too high due to a blockage, overloading on drying or a faulty controlling NTC.

    Also will trip if fan is cutting out, as will not distribute heat. I would say it probably needs a new fan.

    Don’t recognise the E-Nr though 😕

    in reply to: Daft game #200905
    superfix
    Participant

    Re: Daft game

    Did managed to book some time for van defect though!!

    What dirty. 10 units wash and tidy van 😆

    in reply to: Daft game #200903
    superfix
    Participant

    Re: Daft game

    Perhaps we should call the office for some more calls??

    WHAT at 9 pm you havin’ a larf 😆

    Waiting time ref will do instead 😉

    in reply to: Neff U1552N0GB/01 #200634
    superfix
    Participant

    Re: Neff U1552N0GB/01

    Agree with Steve on this. I have never had to remove the facia to change these.

    I find them pretty easy to do (now). But can still remember the first one 👿 .

    Best advice I can give is take your time and note where and how everything sits.

    Good luck 😉

Viewing 15 posts - 346 through 360 (of 865 total)