[SWERV]

Thanks for the reply, that’s a fair comment.

Merv

[SWERV]

I have had exactly the same issue with the back orders. It is very frustrating!.
I have also had other peoples orders arrive and more often than not there is isn’t a copy of the invoice in the box, which means that I have to call them and arrange for them to collect the parcel.

[SWERV]

Hi, thanks for your reply.
Yes it is the one between the two ovens.

Merv

[SWERV]

I suppose it could be.
I’ve been out a couple of times in the last 6 months for the same problem. but have never got it to fail. The mag looks in mint condition and cooling fan is working, but I am rather reluctant to just change the mag.

Merv

[SWERV]

Thanks Dave.
I did try the microwave and had it running on and off for a bout 30 mins. The strange thing was that she said when it did fail she was able to use it on 600W power, but it would come up with the error code when she tried it on full power.

Merv

[SWERV]

Re: zanussi microwave

Hi,
are those numbers definitely correct?. There is a model ZNM11X listed on Pro corner with a pnc of 947608509.
The cap part number is listed as 50294438002.
I hope that helps.

Merv

[SWERV]

Re: Beko WDC7523002W

Thank you. The service manual would be very helpful, email address is sharleydomestics@btconnect.com

Regards
Merv

[SWERV]

Re: Neff combi oven/ microwave B6774N0GB05

I would also agree that it is the fan motor part number 641197. I have replaced a handful for being very noisy.

Merv

[SWERV]

Re: Britannia SI-11XGC-SLK-K Range Oven Timer Dead

I would check the connections on the terminal block. I had one that was exactly the same and it turned out to be a poor contact in the terminal block.

Merv

[SWERV]

Re: AEG KB9810E-M Combi oven

Hi Dave,
thanks for your reply. The pnc number is 944270763/01.
I didn’t get a picture of the blown side of the board. The track leads to the left hand side door switches.
Merv

[SWERV]

Re: Lamona oven HJA3300

I’ve had a couple where the selector switch has caused this problem.
Once I had removed the switch and had a proper look at it, it was clear that a couple of contacts had overheated.

Merv

[SWERV]

Re: Bosch microwave hbc84k551b

Once you have taken the outer glass off, you need to remove the door. There is a plastic bracket on both sides, remove the screws holding that bracket and the door lifts off of the hinges. Remove the inner panel and it will reveal 20-30 screws and all will be revealed.
I always change the glass seal as well.
I hope that helps.
Merv

[SWERV]

Re: Miele DA6290W Hood

Thanks Don.

[SWERV]

Re: Miele DA6290W Hood

That’s fine Don, I appreciate your help.

[SWERV]

Re: Miele DA6290W Hood

Thanks Don.
Could you tell me the part numbers for items 24 and 58.

Merv

[Author]

Posts