Forum Replies Created
-
Posts
-
Re: Zanussi ZKT 641F
Hi.
It does indeed sound like a fault with the control electronic.
Do you have the product number found on a rating plate on the underside of the product? It will begin: 94959—-/–.
Re: ELECTROLUX ERF2832
Hi.
It won’t be a thermostat fault as all versions of this model are electronic controls. It could be that is faulty but to be honest I would think it more likely to be a system fault.
Does the freezer seem too cold perhaps as this may indicate a system restriction.
Re: Zanussi ZJD1219 Dryer stops mid cycle
Hi.
E20 is a drain issue, not a fill issue as replacing an inlet vale would usually require. Are you sure it wasn’t E10 perhaps?
Has the drain filter been checked?
Re: zanussi zwf1427w
Hi.
Does the door lock?
If so, does it start to fill?
If so, does the drum turn?
Please advise.
Re: AEG OKO 6470W lower basket wheels – two missing in photo
Hi.]
Left wheel: 5023 87 76-00 / 4
Right wheel: 5023 87 77-00 / 2
Re: tricity bendix aw1260
Hi.
Have you accessed the diagnostic to retrieve the last recorded fault code?
Also, do you have the product number as this model has 12 different proucts that it relates to.
Re: electrplux cooker sie545pw door locked
It could be the lock motor &/or mechanism itself that is physically jammed.
Re: dammed public
lee8 wrote:In my experience Asian people don’t pay as willingly as other nationalities. like the Irish.
I don’t think Lee was intending to say ALL Asians don’t pay up but I have to say from personal experience that SOME, especially in Greater London, are rather reluctant to pay the agreed price for spurious reasons.
Having said that, this is not something that you say is unique to any particular group of people as human nature is such that people will use any edge to their advantage. Colour, race, religion, whatever is irrelavant.
Peace & love people. Good & bad in all. Yin & Yang.
Re: Zanussi DCS 12 W tabletop dishwasher
Camel wrote:
gonna strip it out and see whats what tonight, see when you say it is leaking, are we talking about a leak, from the main vessel into the electronic side of things?
thanks guys
All that happens is the water pools in the base, raises the polystyrene float, switches microswitch, supplies permanent feed to drain pump.
Not neccessarily leaking onto electronics. Could be a loose hose clip or softener nut. Could be a split in something. Could be blocked air chamber causing overfill. Investigation will be required.
Re: Zanussi DCS 12 W tabletop dishwasher
Hi.
The anti flood device has triggered because you have a leak.
Re: Tricity Bendix BD910W main oven thermostat
Hi.
If it is product number: 944171010. it is either pt no: 3110411000 or 3110224015.
If you can tell me if it is the left, right or centre knob that it relates to I can tell you which one it is.
Re: zan. tce7124 no drum rotation
You have to remove the side panels & top first but yes the drum comes away with the back panel.
Re: Gauge manifold & hoses.
Hi Bob.
I usually work on R600a so ideally am after one that shows millibars as well as a compound gauge although I do sometimes see R134a. Also a double gauge would be preferable.
Cheers.
TSD.
