Forum Replies Created
-
AuthorPosts
-
timdowning
ParticipantRe: servis wd M9003w-a
The main timer knob isn’t 180 degrees out of allignment???
OC or SC on drier valve??
❓
timdowning
ParticipantRe: wma64
:rolls:
timdowning
ParticipantRe: wma64
cheers bazza. my connect price is £63.83 trade. do you order alot through them????
timdowning
ParticipantRe: hoover ama122
Check timer wires haven’t rubbed on metal control arm that runs from timer to top of dispenser.
timdowning
ParticipantRe: servis wiring
two white wires to thermistor side. 2 grey wires to thermostat side. Grey from thermostat to heater, and black to heater.
The thermostat/thermistor has 4 tags. Two tags are the normally closed thermostat side and the other two tags are the thermistor side. Ring them out two determine which is which, 0 ohms is the thermosat side.
Hope this tallys with your machine.timdowning
ParticipantRe: HOOVER HC6 150M NO HEAT
Did the customer complain of no heat?????
They do this quite alot and the machine is perfectly ok. It may be they had the machine connected wrong in the old house and the clothes were hot at the end due to the cold supply connected to the hot!!!!
Have you run the speed wash cycle. The heater should come on after 10 minutes (at a guess).
timdowning
ParticipantRe: Pattern Heaters: A cautionary tale 🙁
Both hoses sprung a small leak after a few weeks. I do remember someone saying some time back they had an uncrimped hose. Mine were crimped. but i think the washer was inadequate.
timdowning
ParticipantRe: Pattern Heaters: A cautionary tale 🙁
What a nightmare. Last year i had two leaks caused by connect universal fill hoses. These are the only two claims i have had in twelve years.
I never pursued this with connect as how do you prove you fitted the part correctly???
Hope Connect react suitably in your favour!
timdowning
ParticipantRe: HPT.WD51
Just to clear my points up….loom on both motor types. yellow tacho wires on old type motors.
timdowning
ParticipantRe: HPT.WD51
I would say so. check loom on right side as it comes across to motor. and also check loom where it secures to motor itself. had a few yellow tacho wires rub through on motor.(old style motor)
timdowning
ParticipantRe: Samsung B1445S Door Boot fitting
I still find taking front off quicker, plus it allows you check pressure system, heater wiring and the security of lower weight.
timdowning
ParticipantRe: Hpt Motor Conversion Problem.
Homespare have got stock of 1604812.
Other than that i think money back 😥
timdowning
ParticipantRe: Hoover WDM120 overfill on rinse.
You would think it would overfill always on wash as well. but i have had numerous calls where it only overfills when it gets to the rinse stages.
timdowning
ParticipantRe: Hoover WDM120 overfill on rinse.
what isn’t?
timdowning
ParticipantRe: Hpt Motor Conversion Problem.
(digital) motor 1604822 dosen’t work on 95 series machines. The motor distributes to fast.
-
AuthorPosts
