Forum Replies Created
-
Posts
-
Re: siemens sn66mo54gb
Or it could be the cupboard unit causing it not to close. Have you pulled the dishwasher out 1/2 an inch from the unit?
Re: Premium Contract Work
All sounds very interesting.
As a ‘one man band’ that provides what you require to every customer that contacts me. (Professionalism from answering the phone to completing the job.)
I would never sub out work as I don’t want to put my reputation, potentially, at risk. So I’m reading what you typed & im getting the buzz until the sub the work out I don’t care bit. That’s a dangerous game to play isn’t it?
Tim.Re: Neff Dishwasher not starting cycle – Water OK Waste OK,
Did you replace the impellor jug or pump impellor?
If it’s just humming it sounds like the cold supply valve is off or the supply hose is kinked as it was filling before you did whatever you did…Re: WTA Contract Work Offer
Many thanks for reply.
Not one reminder that I can find?
I will send an email to subscriptions.Re: WTA Contract Work Offer
I seem to be locked out of the WTA section?
Are memberships due?
Can’t seem to access the WTA Website either…
Thanks.Re: Neff Dishwasher not starting cycle – Water OK Waste OK,
Should just need the impeller jug replacing…
Re: Replacing door handle on Samsgun Washer Dryer
Looking at the photo the 90 degree bent parts of the spring must locate into the white part of the handle. Directly pointing down to the holes in where the pin goes through.
Re: Back to Royal Mail.
Hermes always take an age around these parts.
You should have stuck with Qualtex or Connect. Next day delivery with a time slot…Re: Neff V6540X0GB/01 Washer dryer E13 error
Door lock error code but normally caused by dryer element low insulation.
Re: Siemens dryer wt46e385gb/30 beeping when pressing start
I’ve had this before and just by chance managed to get it into test mode which seems to reset it.
I did it by doing the same style reset as with the washing machines.
(Dial to 6 o’clock & hold one of the option buttons, turn one click clockwise etc)Re: Bosch WVD2452SGB/01 not finishing programme.
The heater is at the front. Front panel off as normal.
