Forum Replies Created
-
Posts
-
Re: What’s the most stupid things customers say?
Me ‘ My charges are £49 plus parts.’
Customer ‘ So is it cheaper if I don’t need any parts?’
Give me strength]
Re: Candy GO F662 erratic behavious
Selector issues are very common on these machines. Find an engineer near you with the search option on here. They can clean the contacts of the selector as well as give the machine a service.
Re: hoover vhd 8142 hd vision. Help needed!
Are the symptoms you have now exactly the same as before you changed boards etc?
The door lock may have be the culprit and it has now damaged the new board?
Re: Hoover dyn8114 error codes
Im sure this machine has the same codes as the Nextra range.
I very much doubt 10 flashes = 0. The codes start with 1 flash. There would be no reason to use 0 as an error.Re: Zanussi zwd1480w – how to remove the drum pulley
If the question is more how to remove the bolt. Then the best way is with a chisel and a lump hammer give the bolt a good hit first. Do the same when tightening.
Re: Hoover Auto OPH716DF Wont Stop Filling And…
Just squirt it directly into the selector, no need to remove anything.
Not sure on what they’ve done to improve it but yes the selector can throw up all sorts of issues. Same as the Servis machines that were made just before they went bust.Re: Hoover Auto OPH716DF Wont Stop Filling And…
If you squirt some switch cleaner into the selector this will then allow the selector to find the off position.
Another thing to try is to hold the start button down and turn the dial a click anti clockwise then back to off.
Modules have been modified but quite often switch cleaner will
sort it.Re: Reset information required
Turn dial to off position.
Turn dial to 6 0clock position.
Then hold spin button and at the same time turn dial one click clockwise.
Then release spin button.
Then turn dial to off position.(Dont forget to try it with the motor unplugged as well)
Re: Reset information required
The reset for this range is as discussed on here many a time. This range all have the touch buttons. It can be fiddly to get the reset to happen. And it has been discussed that the motor sometimes has to be disconnected for the reset to be successful. Personally I havent had to do that.
Re: Refridgeration Repairs
Is this the course discussed at the whitegoods meeting?
As per our previous e-mails in April & May.Thanks.
Re: Hoover con T/drier cuts out after 20mins
Ive only had this once and replacing the module sorted it. I think its the capacitor on the board thats at fault. (Not to be confused with the older models where the start relay board stops it from starting).
Re: Hotpoint WMF740B
c00259258 is coming up as a module. Sorry to be a pain, but could you check that for me please. I know its a Sunday evening. 🙂
Re: Hotpoint WMF740B
Thanks for info. Could you give me both part numbers please.
I’d prefer to go with two switches rather than the wrong one. Many thanks.Re: Hotpoint WMF740B
unfortunately not. its black in colour. I added the b for good luck. the customers gone on her hols and im meant to have the switch for when she returns. cheers.
