Turbo

Forum Replies Created

Viewing 15 posts - 196 through 210 (of 428 total)
  • Author
    Posts
  • in reply to: Hotpoint WD420P Dryer Motor #280496
    Turbo
    Participant

    Re: Hotpoint WD420P Dryer Motor

    That number was on the inside of the door.
    Graham

    in reply to: Connect Pattern Door Hinges Only #280499
    Turbo
    Participant

    Re: Connect Pattern Door Hinges Only

    What you see and what you get are different in my experience, try ordering one and you will see what I mean. 😥
    Graham

    in reply to: Hotpoint CTD 80 F12 #280052
    Turbo
    Participant

    Re: Hotpoint CTD 80 F12

    Thanks Helo 75 I will check that out.
    Graham

    in reply to: intermittent servis washer/dryer #279706
    Turbo
    Participant

    Re: intermittent servis washer/dryer

    Sounds like the power module to me.
    Graham

    in reply to: AEG 88730-W Error C6 91400209801 #278586
    Turbo
    Participant

    Re: AEG 88730-W Error C6 91400209801

    Been back to this machine today and heater reads 2 Meg ohms to earth after it has been on for 20mins. So ordered a new heater but had a choice of two, a 240v element or 230v element. I have ordered the 240v one. can anyone explain the choice of two? 😕
    Graham

    in reply to: New Bosch dishwasher heat pump #278714
    Turbo
    Participant

    Re: New Bosch dishwasher heat pump

    May avoid these heat pump replacements if they come my way as I normally give a years parts and labour gtee 😥
    Graham

    in reply to: FDW20 Heater Change #279484
    Turbo
    Participant

    Re: FDW20 Heater Change

    Thanks for the help everyone.
    Graham

    in reply to: Neff V4380X0 GB/13 Suspension Spring #279477
    Turbo
    Participant

    Re: Neff V4380X0 GB/13 Suspension Spring

    Thanks for the tips will give it a go.
    Graham

    in reply to: FDW20 Heater Change #279480
    Turbo
    Participant

    Re: FDW20 Heater Change

    Been using the Trade Mk Jubilee clips that are not very narrow or flexible.
    Where do you get your clips from Kiddo.
    Thanks Graham

    in reply to: Bosch sealed drum WAA24270 #278383
    Turbo
    Participant

    Re: Bosch sealed drum WAA24270

    Went to a Bosch WAA28161 GB/07 this had a sealed drum and was manufactured in Oct 2007 to my surprise. Did not realize they had been out that long.
    Graham

    in reply to: AEG 88730-W Error C6 91400209801 #278585
    Turbo
    Participant

    Re: AEG 88730-W Error C6 91400209801

    Thanks Chris
    She did have the same problem with this machine last November but another firm visited on that occasion,they changed the pump and removed some limescale according to the reciept.
    Maybe I will ring her and suggest changing both pressure switches as the pressure hoses were ok and the pressure vessel was free of lime scale.
    Graham.

    in reply to: Bosch sealed drum WAA24270 #278370
    Turbo
    Participant

    Re: Bosch sealed drum WAA24270

    Lets hope the pump needs changing every six month that will teach Bosch a lesson.
    Graham

    in reply to: Bosch sealed drum WAA24270 #278357
    Turbo
    Participant

    Re: Bosch sealed drum WAA24270

    What a horrible looking machine and sure to drag the Bosch brand name down even further. Do they expect the customer to empty that filter 😥
    Still at least the pump is not sealed to the drum 😆
    Graham

    in reply to: Dealing With “Call Backs” #276834
    Turbo
    Participant

    Re: Dealing With “Call Backs”

    Yes let Whirlpool do that job the board will only be £10 cost price to them do doubt 😥
    Graham

    in reply to: Siemens dishwasher SE55M570GB41 not filling #277777
    Turbo
    Participant

    Re: Siemens dishwasher SE55M570GB41 not filling

    Should be able to get your leads on the connectors at the end of the wires inside the dishwasher cabinet.
    Sometimes the valve coils lose there resistance which damages the board 😥
    Graham

Viewing 15 posts - 196 through 210 (of 428 total)