Forum Replies Created
-
Posts
-
Re: Stoves Double Oven
are they the one’s with a small hole in the arm? if so you need to open the door put two small pins /screwdrivers in to lock them then slide the door off
wilf
Re: rangemaster 110 electric cooker.
been a while back but Im sure I fitted a standard to one of these
wilf
Re: Hotpoint WF630G Bearings
I dont even try to knock out the bearings anymore just fit rear half tub. even with the hotpoint bearing tool kit it only works two out of three times as they are too large a bearing for too micky mouse a thread size to pull and the replacement tool parts too expensive when the threads wear as they will. Ive even bought a tap to recut the thread. with a magnifying glass you can see the distortion on the threads and yes I do keep them well oiled!
wilf
Re: Just Brilliant!
I fished one out of a WMA the customer was not best pleased and wrote to the company and ………………THEY SENT HER A CHEQUE TO COVER MY CHARGE! I suspect we will soon see the back of them
wilf
Re: One for Alex – How to take the back of a Zanussi
once went to a 95 where the customer had installed the machine flush into a side wall by knocking a hole through into the coal house. made access to the pump easy once I had moved all the bricks. god knows what the council thought!!!!!!!!!!!
wilf
Re: Leisure rangemaster 110
customer back from holiday so here’s the number 5344001183 year96 fan motor and timer, numbers and who stocks if you can
thanks wilf
Re: Leisure rangemaster 110
cant find that but I’ll get back if I can get the customer to come up with the book thanks fof now
wilf
Re: Hotpoint FEW 12
I dont try to get the bearing out just fit tub rear half and spider if required (cut through the fixing bolts with an angle grinder) I usually take the tub back to the workshop to strip and re build then take it back to re assemble
wilf
Re: Appliances on “stand by”
all the government talk about not leaving machines on standby and saveing energy must have passed hotpoint etc by look at the WF on off is fed on a ribbon cable and presumably requires a constant power drain . older machines when ther off ther off………………. ah progress
wilf
Re: Help: how to replace belt on CTD00 condensor dryer?
the junior hacksaw frame idea works well ,two works better!!!!! 😆
wilf
