allan73

Forum Replies Created

Viewing 15 posts - 316 through 330 (of 497 total)
  • Author
    Posts
  • in reply to: help electrolux oven eso pmss #332235
    allan73
    Participant

    Re: help electrolux oven eso pmss

    I’ve got a problem with a similar pyro oven clockworkone the inner glass has been smashed & now the fan’s not running, do you know how the door engages the microswitch ?

    in reply to: E/lux EOC6690x oven glass smashed & no fan #332169
    allan73
    Participant

    Re: E/lux EOC6690x oven glass smashed & no fan

    So after reading rogue_element’s description of the fault codes I’m wondering if there are other faults that aren’t caused by the broken glass on this oven.
    Maybe another one for the landfill ❓

    in reply to: E/lux EOC6690x oven glass smashed & no fan #332165
    allan73
    Participant

    Re: E/lux EOC6690x oven glass smashed & no fan

    Thanks for the info Dave, I still can’t work out how the inner glass being absent is stopping contact with the microswitch which seems to be built into the door lock and engages the main fan motor 😕

    The fault codes being produced are, I assume because the fan is not running causing the sensor to read an overheat.

    Allan

    in reply to: Whirlpool built APDW/2 Circ Pump ? #331601
    allan73
    Participant

    Re: Whirlpool built APDW/2 Circ Pump ?

    Thanks 😉

    in reply to: Whirlpool built APDW/2 Circ Pump ? #331598
    allan73
    Participant

    Re: Whirlpool built APDW/2 Circ Pump ?

    I’m fitting the new pump to this next week, do I need any tips or is it really very simple ❓

    in reply to: hotpoint fdw60 #331816
    allan73
    Participant

    Re: hotpoint fdw60

    As a novice to dishwashers can I just ask, is it never a good idea to use cable ties on the hoses or just not on this particular job ?

    in reply to: Qualtex tub vacs #321164
    allan73
    Participant

    Re: Qualtex tub vacs

    Apparently Numatic rep’s have been spreading tales that the supply of these vacs is about to dry up.
    Did you get an email from Qualtex re this Gandh1 ?

    in reply to: hotpoint bwm 12 #331761
    allan73
    Participant

    Re: hotpoint bwm 12

    I think I read on here that a Zanussi gaiter spring will go on these.

    in reply to: 10 year warranty on LG direct drive motor. #330087
    allan73
    Participant

    Re: 10 year warranty on LG direct drive motor.

    Do the stators fail on these anyway, or is it allways the hall sensor ?

    in reply to: white knight dryer 76aw #331721
    allan73
    Participant

    Re: white knight dryer 76aw

    Faulty part 😕

    in reply to: Hotpoint FWD80 no motor #331702
    allan73
    Participant

    Re: Hotpoint FWD80 no motor

    Thanks tim, I thought I heard the motor humming but when the heater kicked in it was hard to tell 😡

    in reply to: Whirlpool built APDW/2 Circ Pump ? #331596
    allan73
    Participant

    Re: Whirlpool built APDW/2 Circ Pump ?

    Are the new pump kits easy to fit by the way ?

    in reply to: Whirlpool built APDW/2 Circ Pump ? #331595
    allan73
    Participant

    Re: Whirlpool built APDW/2 Circ Pump ?

    Thanks, Allan.

    in reply to: Indesit WIXL 163 suk pulses on fill etc #331434
    allan73
    Participant

    Re: Indesit WIXL 163 suk pulses on fill etc

    shall I phone EMW on this one ?

    in reply to: hotpoint tcm570 blowing stats #331248
    allan73
    Participant

    Re: hotpoint tcm570 blowing stats

    Don’t know why I didn’t think of that Iadom 😳
    Ive got a plug in energy monitor in the van, thanks for that.

    Allan.

Viewing 15 posts - 316 through 330 (of 497 total)