Forum Replies Created
-
AuthorPosts
-
Andy jones
ParticipantRe: bosch d/w sms53e12gb/01 (about 4 years old)
Will try that next time. Cheers
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: Whats the most annoying thing customers do?
The most annoying thing in my opinion is when they mutter the immortal words
“While you’re here” could you…..
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: Bosch wvd24460gb/02. Fd 9103 00508
Hi Martin,
The only lights on the display are the programme selected, was expecting a fault code to flash up after a while but nothing
It’s only 2 years old so I think they’re going to get bosch out but I hate not being able to give an exact answer
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: bosch d/w sms53e12gb/01 (about 4 years old)
You have my sympathy. I’ve got tennis elbow in both flaming arms
The joys of being a service engineerSent from my iPad using Tapatalk HD
Andy jones
ParticipantRe: bosch d/w sms53e12gb/01 (about 4 years old)
Once sides etc are off, remove module,rear cover ( waste and fill hose ) disconnect door hinge cables, lay it back and prise the base away. Really wasn’t too bad, this was an integrated machine though so assume it would be the same for free standing
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: bosch d/w sms53e12gb/01 (about 4 years old)
smeghead wrote:
eastlmark wrote:
Why scrap? have you seen how cheap the pump is for those? (£62 from qualtex) and it includes the heater, formerly £90 odd in itself on previous Bosch dishwashers. Easy change too once you get the hang of it.easy to change! how long does it take then- total strip down job innit’, 2-2 1/2 hours ?
if there’s an easy way I wish I knew!
Clive.
Their not too bad, drop the base off which is the worst bit but after I done 1 I managed to get the base off in about 10 mins on the next one
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: Hotpoint WMF740 inlet valve (extended piece)?
I think you may be able to get away with it if you order the backplate for the valve. If not as Jim says it’s the complete dispenser assembly
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: INDESIT IWDC6015
Unless the dryer control was set to a time or auto by mistake, I would guess it’s her that done it and is trying a fast one
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: connect rip off merchants
Just had my monthly bill from them, £50. Used to be minimum £800
Not one call to ask why
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: Bosch heater unit replacement?
Ah right. Wasn’t the model I was thinking of then
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: National Appliance Care
Got home and there’s a message from them for me to call them. I take it best action is to delete the message 🙂
Andy jones
ParticipantRe: Bosch heater unit replacement?
Bit of a pig base has to drop right down or even come off. Once you’ve done 1 there not too bad
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: Things You’d Love To Say
7. I went on the Internet and it said that the problem is…………
So I’m here for what reason??Sent from my iPad using Tapatalk HD
Andy jones
ParticipantRe: Football Season 2014/2015
Actually found myself giving the footy a miss for the Ryder cup. What a brilliant competition it is
Sent from my iPad using Tapatalk HDAndy jones
ParticipantRe: Hotpoint dryer belt fitting tool
Bolts line up dead easy imo. Use a pair of pipe grips on motor to lever it down. You don’t remove all the bolts just 3 and slacken the other to give a pivot point. Just the way I do it if others find another easier way then brilliant. Don’t suppose there’s ever a correct way
-
AuthorPosts
