Forum Replies Created
-
Posts
-
Re: LG WD12126RD Washer Motor locking up
Stator has failed – 5031687978486 on Connect @ £98 + VAT.
Steve.
Re: Zanussi FJS1186
That’s a 1998 model – uses a VA20 timer with separate module.
What’s the fault?Steve.
Re: Zanussi ZWD12270 ERROR
Door interlock or drier element shorting to earth. Unplug the drier element and try the machine again.
HTH,
Steve.
Re: D&G now!
Steven wrote:I have on occasions had a job from D&G via JTM ❗
Is there a deal being brewing here ❓
Just maybe they can get rid of individual agents knowing they can get coverage via JTM with this less admin costs of dealing with seperate engineers and lower rates paid by jtm they make savings here 💡
Only time will tell, will have to see if jobs increase from jtm.
Steven
Lots of references to JTM there………don’t they own / operate 0800Repair? Look at this link posted in the 0800 thread:- http://www.theadvertiserseries.co.uk/bu … _turnover/
Are they looking after their own at the expense of us indies? It may be coincedence; it may be completely unconnected; but it may explain some goings – on. Dates line up; they have a huge rise in business in a quiet period; agents get sacked at the same time 0800 boast huge expansion; more franchises being punted, could 0800 have been set up to redirect the business and corner the market…………. 😕 I’m not a conspiracy theorist, but from the outside looking in, it just seems too coincidental.
Steve.
Re: sept 2010 meeting
washdoctor wrote: Are we guaranteed guests
Ade 🙂
Qualtex are definately attending; spoke to Phil and September 24th is in the diary…… 😉
Steve.
Re: World Cup
iadom wrote:I always said that the current England side is every bit as good as Argentina. 😛 😯 😆
Only if every England player was armed with a Taser gun…..nah, they’d probably miss with those too…. :rotl:
Steve.
Re: zanussi zwd16270w (91460400300)
Shorting drier element for sure. If the drier is little used the elements seem to fail quicker (maybe they get damp and can’t dry out in the chamber). Unplug the element first to clarify – but take an element with you; it doesn’t matter if you don’t need it, you are sure to use it in another machine very soon. It appears that this is becoming a very common problem with late Lux washer driers. 🙁
High quality stuff…… :rolls:
Steve.
Re: Zanussi WJD1667W drier issues.
Condenser solenoid works – apart from the PCB running the solenoid valve, what device senses condenser water intake? I’ve scoured TDS tech and I can’t find anything. 😕
Steve.
Re: CDA CI992 washer drier.
Thanks, Chris!!
That translates as a “Don’t think I’m gonna get involved with that” type of job. 🙁
Cheers,
Steve.
Re: Miele drain pump
Is this it? Says it fits 800 series…….. 😉
Qualtex QUAPMP251 @ £28.78 + VAT. Pattern part.
Steve.
Re: Waste Carriers Licence
Dales-Electronic wrote:Having been down this route with the ISE WEEE operation and reading with interest the work done by you guys perhaps now is the time to show either a united front and form a team to take the EA/Government on ( with DASA if they want to help) or start lobbying our MPs. The whole thing is just a farce and needs a massive overhaul that reflects the industry – what they have always been doing is supporting the recycling industry at the cost of the reuse community.
On Sky news today, Nick Clegg is asking for representations from businesses about pointless beaurocratic interference and how these laws can be changed or repealed to help the business community. The T11 certainly falls into that category…….maybe someone is listening…… 😉
Here it is:- http://yourfreedom.hmg.gov.uk/
Steve.
Re: work dead
maltheviking wrote:
adv wrote:
can i have the top half of your user pic 😆Now that would give you stress!!!!!!!!!!!! 😆
That’s because it’s Christopher Biggins……… :rotl:
Steve.
