Forum Replies Created
-
AuthorPosts
-
aqualectric
ParticipantRe: Indesit WM12X
1603292 or new Hotpoint WMA interlock.
HTH,
Steve.
aqualectric
ParticipantRe: belling cooker
Connect part number – 5045174285223 @ £4.52 + VAT. Shows as a stock item. 😉
HTH,
Steve.
aqualectric
ParticipantRe: Belling oven and hob parts
Thanks, Chris! 😀
Steve.
aqualectric
ParticipantRe: WJD1357 Drain Pump removal query
If the impeller is loose or falling off you will need a new pump. E20 is a “no drain or drain time – out” fault. A new one should be easily available from Shop @ in the left menu column. Or click the ‘Find a spare part’ banner below.:wink:
HTH,
Steve.
aqualectric
ParticipantRe: AEG F80820W overfilling airbox.
Yeah, I seem to remember something about that mod…..IIRC it was to tie the safety drain hose in a ‘U’ shape – didn’t work on the last machine I did. It would help if you could see for sure what was blocked.
Anyone else solved this problem? I’m intrigued why it happens and a definitive fix would be appreciated.Thanks again for the input, Chris.
Cheers,
Steve.
aqualectric
ParticipantRe: Hoover HNL7126 dead.
Can anyone tell me if the push button PCB behind the fascia of a Hoover HNL7166 – 80 (3100197607300182) is the same as the one fitted to the HNL7126 mentioned above? It looks identical……. 😕
Any ideas??
Thanks,
Steve.
aqualectric
ParticipantRe: whirlpool w/m model HDW6000/WH
It’s a modern machine, mate….anything is possible…. :rolls:
Steve.
aqualectric
ParticipantRe: whirlpool w/m model HDW6000/WH
Have you checked the motor brushes? 😉
HTH,
Steve.
aqualectric
ParticipantRe: Tecnik DW2677/1 dishwasher
Do you mean the plastic airbox that fits on top of the softener? If so, part number from Connect:- 5031689840590.
HTH,
Steve.
aqualectric
ParticipantRe: Hoover HNL7126 dead.
All seems OK there; I have had this push button board pop out of its mounting clips before so I checked that. Start button clicks; seems alright…… 😕
Steve.
aqualectric
ParticipantRe: Bosch Sgs45EO2GB/45 d/w
Penguin45 wrote:Evenin’ Smarti, Aqua. :waving:
:p45:
Hi, Chris!
Question is, what the hell are we doing on here when I’m a Celebrity is on? :snig:
Steve.
aqualectric
ParticipantRe: Bosch Sgs45EO2GB/45 d/w
Almost certainly the water metering matrix and sump feed pipe under the left side panel. The sump pipe will probably be clogged with gunge and this slows the water into the machine. Backing up of this water will cause the on / off filling situation. Remove all the parts of the float chamber and sump pipe, clean out and refit.
HTH,
Steve.
aqualectric
ParticipantRe: Bosch washer drier key symbol?
Thanks, Tim! That worked!!! 😀
Cheers,
Steve.
aqualectric
ParticipantRe: Philips AKB224BV hob regulator.
Thanks, Chris!!
Steve.
aqualectric
ParticipantRe: Hoover HDC6UK T/dryer
It’s at the top on the inside; fold back the tabs and lift off the metal cover.
Steve.
-
AuthorPosts
