[Bernie]

Re: Hoover Tumble Dryer VHV680F-80 no heat

Thanks for the reply Chris
I looked on Connections site and it has a Thermal Limiter part no. 5045171534522 would that be the part?

[Bernie]

Re: Whirlpool dishwasher ADP4601/1 Fills does nothing then d

Thanks for the quick reply will have a look at the door wiring
Bernie

[Bernie]

Re: Hotpoint Tumble Dryer CTD00P part number needed

Thanks for the quick replys. I will have to try the stuck on one and see if it works.
Bernie

[Bernie]

Re: Hotpoint WT741 Stuck on 01 minute

On A1engineers suggestion
I removed the sump hose and pressure chamber along with its hose and cleaned both although they were not that dirty refitted put it on a 30 minute wash and sat and waited all worked ok. I let the customer try it for 2/3 weeks and so far it has worked ok.

[Bernie]

Re: Hotpoint WT741 Stuck on 01 minute

I have runout of ideas, has anyone got any suggestions. I did see 2/3 other topics on the same machine and problem did you get the machine going?

Thanks
Bernie

[Bernie]

Re: bosch code wont reset

Found this hope it helps
Set selector switch to the 6 o’clock position , hold the spin speed button , turn the selector switch one click clockwise and after a couple of seconds release the spin speed button. It may still show F21 but then switch off and switch back on and it should clear.
Bernie

[Bernie]

Re: Hotpoint WT741 Stuck on 01 minute

Thanks for the reply
Bernie

[Bernie]

Re: Beko WMA5100W Prewash led flashing

Thanks for the help clockworkone,
Mike’s answer in that post was spot on. I wonder how many Beko’s have been written off thinking it was the board.
Thanks again
Bernie

[Bernie]

Re: Whirlpool AWM6141/1 Sticks at 1 min

Had a look heater all ok, customer does not want to buy new machine just yet so going to switch it of at wall when it ends

[Bernie]

Re: Whirlpool AWM6141/1 Sticks at 1 min

Thanks will have a look
Bernie

[Bernie]

Re: Whirlpool AWM6141/1 Sticks at 1 min

Is that the heater down to earth or open circuit?
Thanks for the quick reply
Bernie

[Bernie]

Re: Bosch Dishwasher SGV46M03GB/36 Not washing

Thanks for the quick reply Martin

Bernie

[Bernie]

Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

In reply to Martin’s question. The old board I fitted (complete with Panel-facia) was one without the LED display so different to the one on the machine.
I only used it to see if it was the PCB.
In reply to Mike’s question. How do you post a photo on here?
Bernie

[Bernie]

Re: Bosch Auto WAA24171 Flashing Rinse Light…

To reset try:-
Set selector switch to the 6 o’clock position hold the spin speed button (just keep your finger on the button), turn the selector switch one click clockwise 7 o’clock and after a couple of seconds release the spin speed button.
It may still show F21 if it has a display but then switch off and switch back on and it should clear

[Bernie]

Re: Bosch WAE24363GB/05 FD 8806601337 Dead Blank/No Displa

I have found an old PCB without the display and have fitted it to see if it works and it does, so it is the board that has gone.
Does anybody know what might have gone on these boards or suggest what I might try?
Thanks Bernie

[Author]

Posts