Bernie

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 289 total)
1 2 3 … 5 6 7 … 18 19 20
  • Author
    Posts
  • February 22, 2012 at 10:33 am in reply to: Bosch Dishwasher SGS56E02GB/35 Burning Smell #369272
    Bernie
    Participant

    Re: Bosch Dishwasher SGS56E02GB/35 Burning Smell

    Thanks for the reply nomadPaul
    Would these make it smell inside the tub and the smell does seem to get stronger as the temperature rises

    Bernie

    January 30, 2012 at 8:59 pm in reply to: Electrolux EWX14450W No display pnc91460600100 #368078
    Bernie
    Participant

    Re: Electrolux EWX14450W No display pnc91460600100

    Thanks for the reply that is what I was thinking, if it is the PCB. I do not think EMW do them might give them a ring in the morning

    Thnks Bernie

    January 25, 2012 at 9:22 am in reply to: Indesit W123UK BG Program sticks on wash #367554
    Bernie
    Participant

    Re: Indesit W123UK BG Program sticks on wash

    Thanks for all your suggestions I will go back and give them a try

    Thanks again
    Bernie

    January 20, 2012 at 5:30 pm in reply to: Indesit W123UK BG Program sticks on wash #367551
    Bernie
    Participant

    Re: Indesit W123UK BG Program sticks on wash

    I have not done any readings yet, what should I get?

    Thanks for the reply Martin

    Bernie

    December 21, 2011 at 3:12 pm in reply to: Zanussi ZJ1217 91451010802 Fault Codes #365965
    Bernie
    Participant

    Re: Zanussi ZJ1217 91451010802 Fault Codes

    Thanks Martin

    December 21, 2011 at 2:36 pm in reply to: Zanussi ZJ1217 91451010802 Fault Codes #365963
    Bernie
    Participant

    Re: Zanussi ZJ1217 91451010802 Fault Codes

    The problem was LED 2 & 8 flashing E41 door lock, which I changed and machine ok now. Found this on UKWhitegoods.

    I just wanted to know how to read the eight vertical LED.
    I did look on Distriparts DVD could not find anything.
    Thanks for the reply Martin

    December 20, 2011 at 7:59 pm in reply to: Hotpoint Dishwasher BFI620 Not Drying #365739
    Bernie
    Participant

    Re: Hotpoint Dishwasher BFI620 Not Drying

    Thanks

    Bernie

    December 20, 2011 at 3:08 pm in reply to: Hotpoint Dishwasher BFI620 Not Drying #365737
    Bernie
    Participant

    Re: Hotpoint Dishwasher BFI620 Not Drying

    No it does not heat on wash or drying cycles, but from what the customer told me it went through the program and did not dry.
    Thanks for the reply Iadom


    Bernie

    December 8, 2011 at 10:09 am in reply to: LG WM14445FDS #365106
    Bernie
    Participant

    Re: LG WM14445FDS

    Do not know if it’s of any help but had a WM14440TDS stuck at 17 mins this was a bad load 1 x large towel and a pair of thin trousers. I watched it for some 10/15 mins just kept tumbling ans stayed at 17 mins, when I took the clothing out and tried it work fine and went into spin
    Bernie

    December 8, 2011 at 9:57 am in reply to: Creda W220VW Only fills for 20 seconds then starts to wash #365051
    Bernie
    Participant

    Re: Creda W220VW Only fills for 20 seconds then starts to wa

    Thanks Jim for email.
    Have checked all connections and they are as they should be.
    I have now put the PCB that was on the machine back, tightened all connection and it is now working correctly so must have been a bad connection I guess.
    Thanks to all of you for your help.
    Bernie

    December 7, 2011 at 11:23 pm in reply to: Creda W220VW Only fills for 20 seconds then starts to wash #365049
    Bernie
    Participant

    Re: Creda W220VW Only fills for 20 seconds then starts to wa

    I have sent you my email address Jim

    Thanks to all of you for your help

    Bernie

    December 7, 2011 at 8:09 pm in reply to: Creda W220VW Only fills for 20 seconds then starts to wash #365044
    Bernie
    Participant

    Re: Creda W220VW Only fills for 20 seconds then starts to wa

    you could be right about the wires in the wrong place on the board. As I belive someone else had been to the machine before me. As when I remove them I allways number them and marke the board also.
    Do you know which go where?

    Thanke for reply

    December 7, 2011 at 7:59 pm in reply to: Creda W220VW Only fills for 20 seconds then starts to wash #365042
    Bernie
    Participant

    Re: Creda W220VW Only fills for 20 seconds then starts to wa

    Thanks for the suggestion about the valve but why does it fill ok on synthetics?

    Tested with a load and without, still only fills for 20 seconds

    November 2, 2011 at 8:33 am in reply to: Hotpoint WF860F Ultima no motor action #362253
    Bernie
    Participant

    Re: Hotpoint WF860F Ultima no motor action

    I did wonder if it might be that,
    Thanks for confirming it.
    Bernie

    September 22, 2011 at 4:39 pm in reply to: Replacement cut-out/stats for Hoover/Candy t/d heater elemen #332036
    Bernie
    Participant

    Re: Replacement cut-out/stats for Hoover/Candy t/d heater el

    I have finally found a supplier for these thermal fuses
    Get them from :-
    www1.conrad-uk.com
    Then search for:-
    Thermal Link 155431.006D02 206 C
    £5.28 each

  • Author
    Posts
Viewing 15 posts - 76 through 90 (of 289 total)
1 2 3 … 5 6 7 … 18 19 20