Forum Replies Created
-
Posts
-
This is the same bloke from Anglesey who rang me up as a supplier of ISE’s and would’nt get off the phone asking loads of questions, he is desperate for a ISE2.
He lives in Wales, I live in the south east of England!, a little bit too far then. . .
That was hard to watch!
If he puts that live lead on to the chasis whilst holding it with the marigolds, does he thinks he will be fine!.
If any of you are signed up to Youtube please tell him what he is doing is actually incredibly dangerous.
Did you test the machine with a load? What was the load that was jumping all over the place?, possibly an out of balance load.
These machines have a very sensitive out of balance load, advise redistributing load.
Are you saying that the drum feels restricted in its movement if turned in a certain direction, this could indicate a blockage behind the drum, did you ckeck the sump etc?
just use a normal jubilee clip, saves time messing around with these things. (you can reuse the old clamp band by the way!).
hi Helo_75
some idiot thought it would be funny to put pictures up of pornography in the public forums, so you really didnt miss anything.I installed that ISE10 washer, he’s got a ISE5 dishwasher next to it now.
I had to install the ISE10 in his shed before the house was built which was bloody hard work removing an entire shed load of stuff and putting it back after.In fact I had to do it twice as they sent out to me a ISE5 washer first.
Just had a look at the repeat, he has now hidden the machines next to that boiler thing under the worksurface with furniture doors on so thats why you cant see the machines, grrr
I dont think the inlet valves are getting power as these are new ones and still not filling.
I will go back tomorow and check the board.
Thanks for replying graham.I can’t put my meter on the fill valve to test as its the fill valve encased in plastic moulding inside the aquastop.
I dont think so as I can’t hear it being energised.Re: Massive Indesit price rises
iadom wrote:
canufixit wrote:
……or £200. for a new machine.. ❓Not for much longer, 😉
Vomet are selling the entry level Bosch washer for £238, wow! havn’t seen any evidence of prices falling.also water runs off crockery and cuttlery where as plastic has a rough surface and retains surface water, using rinse aid helps with cuttlery and crockery but makes no difference with plastics.
