[boselecta]

Re: Hoover softwave

could very well be the heater open circuit. I would also check for the blocked pressure chamber at front

[boselecta]

Re: Maytag frost free double door GC20C7C3EB

Have been trying all day to order this part from Maytag uk.
There call center is rubbish, I cant find anywhere else in the Uk where I can get these parts, anyone know anyone where i can get these parts from?

[boselecta]

Re: Diplomat select 110 AHY4310 / 13

thanks kwatt
going to have another another look at this one, it will not defeat me!

[boselecta]

Re: Any advice please

My only advice would be ensure your public liability covers work on commercial premisis, Insist that this is put in writting and sent to you by your insurance company.

[boselecta]

Re: Proline / Matsui Chinese Dishwasher parts

thanks p45 will get that inde part then as cheaper

[boselecta]

Re: Whirlpool Bearings

Some people on this forum Im sure will recomend changing the rear tub in situ. I have done both ways and have found it quicker to just take the hole tub out. All those clips to get off and trying to get the rear tub out the back it is definatly better to take the hole thing out.

[boselecta]

Re: Maytag frost free double door GC20C7C3EB

thanks alf that looks like a good website to get Maytag bits from

[boselecta]

Re: hotpoint vtd66 or 60 t/dryer

F10 ‘Common or heater open, one shot stat open circuit’
F07 ‘not used, active’

this is as the codes are listed in the UKwhitegoods Fault code guide

[boselecta]

Re: Hotpoint WD640 – Smoke!

It could be fluff on the element, if it is you would need to take the dry unit off and spit the dry housing in half. Unless you are competant and have a set of torx bits to take the unit off call your local repair agent. If you do do it yourself switch off the power. I would advise calling out your local repair man rather than calling hotpoint out who will charge £90.

[boselecta]

Re: Second hand dishwasher

You would be best to contact your local Comet store, the technical dept. will be able to print you a copy of the manual. Through the years Proline have put their name to half dozen manufacturers.
sorry but Ha ha, Pro life very good. Choose life Choose Proline.

[boselecta]

Re: Bosch WTA3100gb T/Dry – Side removal

on recent models have seen a screw at base of facia pannel that goes throught to side pannel which is hard to access, had to virtually remove facia. also check for a screw under bottom of side pannel (like hotpoint range)

[boselecta]

Re: Diplomat (MFI) fan motor for ADP4890

that looks the right part, its the same price as at masterpart, might as well get it from you lot then.
thanks alot kwatt

[boselecta]

Re: Beko WMA1512S No drain no Spin??

This sounds like a beko I went to a couple of times with intermitant draining, When I tested it all functions were ok. Got call back still the same, checked sump hose and pressure system and clogged with soap suds. Cleared and all ok, think eco ball must have got stuck in the high position with water in it, machine thinks full of water. Just strange as wouldn’t expect it to be intermintant. Worth checking anyway

[boselecta]

Re: AEG washing machine stops after 20 intermitantly code ‘E

Thanks ‘dentedporshe’ found a blockage in circ pump. Think I will have to buy the UKWhitegoods Fault code guide then.

[boselecta]

had exactly that last weekend on a bosch dishwasher flooded her kitchen, incurance job. Loads of foam in appliance.
After this I would never recomend these things to any customer, had I done that before she used them she would be claiming on my public liability insurance.

[Author]

Posts