BSH-MAN

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 308 total)
  • Author
    Posts
  • in reply to: siemens f/freezer #291301
    BSH-MAN
    Participant

    Re: siemens f/freezer

    Had few Danfoss compressors fail on these.
    πŸ˜₯
    Don’t think it’s the capacitor as most are smoothing and not start caps.

    in reply to: BSH Group Redundancies? #279095
    BSH-MAN
    Participant

    Re: BSH Group Redundancies?

    16 Engineers gone nationwide. πŸ˜₯
    Most not voluntary redundancy.

    in reply to: New way to replace Bosch brushes. #289656
    BSH-MAN
    Participant

    Re: New way to replace Bosch brushes.

    Naughty boy (Joe) didn’t fit a cable tie. The wire may snap as it joins the connector. :rolls:

    in reply to: Bosch WTL6003gb (whiteknight) #286341
    BSH-MAN
    Participant

    Re: Bosch WTL6003gb (whiteknight)

    Soak the fan blade hub in wd40 to get the thing off.
    It’s better if you stretch the belt prior to fitting as this makes quite a difference.
    I fit the belt over the drum and motor pulley and then lift up the drum.
    At this point I find copious amounts of swearing helpful.

    in reply to: Bosch T/D WTE84102/GB05 #286413
    BSH-MAN
    Participant

    Re: Bosch T/D WTE84102/GB05

    From memory, it’s the element NTC out of range.

    in reply to: Neff oven, cooling fan stays on #286419
    BSH-MAN
    Participant

    Re: Neff oven, cooling fan stays on

    Selector switch contacts welded together? πŸ™‚

    in reply to: New Bosch dishwasher heat pump #278710
    BSH-MAN
    Participant

    Re: New Bosch dishwasher heat pump

    smartin wrote:πŸ™ 4 month old dishwasher need i say more

    Yes please! πŸ˜€
    What was the fault with the heat pump?

    in reply to: Neff V4380X0 GB/13 Suspension Spring #279478
    BSH-MAN
    Participant

    Re: Neff V4380X0 GB/13 Suspension Spring

    I have used a carjack under the motor a couple of times. 😳
    If only to see the reaction on the customers face when you carry it into the kitchen. :mrgreen:

    in reply to: Bosch HBN131120B/03 oven – Condensation #279513
    BSH-MAN
    Participant

    Re: Bosch HBN131120B/03 oven – Condensation

    Do they pre heat the oven?

    in reply to: Bosch/Smeg Washer dryer? #279132
    BSH-MAN
    Participant

    Re: Bosch/Smeg Washer dryer?

    PINKY wrote:There was a hoover for a short while, Definitely!

    No, Superfix is correct. Gias have never made a washer dryer for Bosch. But they do for Tecnik. :lesson: πŸ˜€

    in reply to: Bosch sealed drum WAA24270 #278382
    BSH-MAN
    Participant

    Re: Bosch sealed drum WAA24270

    iadom wrote:

    My information was that this machine was an exclusive for indies only.

    Jim.

    That may explain things a little. πŸ˜‰

    in reply to: Bosch Door Seals #278605
    BSH-MAN
    Participant

    Re: Bosch Door Seals

    Its cause is down to customers leaving items of laundry hanging out of the door and then starting the machine.
    :rolls:

    in reply to: Bosch sealed drum WAA24270 #278378
    BSH-MAN
    Participant

    Re: Bosch sealed drum WAA24270

    don wrote:

    Martin wrote:

    Thank’s for the tip about spotting the stub door handle. I’ll advise my customers to avoid those in future. πŸ˜‰

    Made in Poland πŸ˜‰

    Don

    Probabley Chinese but could be Polish. Sub Β£280? I saw that pump on training info 18 months ago but it was not fitted to U.K. appliances at the time. (This is first I’ve seen)
    You must understand that it is the Brand in this country that dictates to the factories what appliances/price they must supply.
    It may be an attempt to steal from some of the Indesit type market.
    My personal recommendation to anyone in the market for a cheaper end Bosch washer would be a WAE type.
    There is nothing unreliable about the WAA type, far from it. I just think for a little more money you get a better value with a Bosch WAE24363GB @ Β£317

    Iadom, do you have a model number? I cannot find any WAA’s on the Bosch web site any more. :con:

    in reply to: Would appreciate washing machine recommendations… #275646
    BSH-MAN
    Participant

    Re: Would appreciate washing machine recommendations…

    jonnyw wrote:Thanks for the replies.

    I noticed tonight that Comet are selling a BOSCH WAA24162GB for Β£238, and you can pay a further Β£110 to increase it to a five year warranty.

    .

    Bosch Classixx WAE24363 is the better value appliance IMHO.

    πŸ™‚

    in reply to: Mobile printers #276585
    BSH-MAN
    Participant

    Re: Mobile printers

    We use Canon i80’s

Viewing 15 posts - 46 through 60 (of 308 total)