cab

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 423 total)
  • Author
    Posts
  • in reply to: New Penguin movie!! #195399
    cab
    Participant

    Re: New Penguin movie!!

    I want a penguin, dont want to buy the powder. 😮

    cab

    in reply to: AEG built in fridge with electronic control (A headache job) #195459
    cab
    Participant

    Re: AEG built in fridge with electronic control (A headache

    is the fridge working ok otherwise? if so it would appear the board isnt sensing the magnet, if you look at the service bulletins on tds there is one which relates to poor magnets, there is one also for mixed up buttons on board!!!!

    cab

    in reply to: AEG LAVW1050 91400242400 #195042
    cab
    Participant

    Re: AEG LAVW1050 91400242400

    Hi code 51 is pcb fault, triac which controls motor!

    cab

    in reply to: Zanussi FJR1254W Error Code E90 #194865
    cab
    Participant

    Re: Zanussi FJR1254W Error Code E90

    front user board has allways been a problem on these machines from conception, E91 comunications error between userpcb and main pcb, very rairly main pcb.

    cab

    in reply to: zwf1220 #194733
    cab
    Participant

    Re: zwf1220

    Check you pm 😀

    cab

    in reply to: Zanussi Z9282T only partially draining #193688
    cab
    Participant

    Re: Zanussi Z9282T only partially draining

    sounds like its blocked not easy to clear, may need a new one.

    in reply to: AEG Favorit F5050 D/W #194434
    cab
    Participant

    Re: AEG Favorit F5050 D/W

    Hi Jim
    Fairly old model, push putton program selection, with a mechanical timer. Have had the timer sticking, if electricity supply is interupted, turning the timer shaft with a screwdriver resets it.

    cliff

    in reply to: Samsung refrigeration door seals #194232
    cab
    Participant

    Re: Samsung refrigeration door seals

    If you pack the seal surely it wont be flush and would be visible.

    cab

    in reply to: Lethal Zanussi F1045w #194377
    cab
    Participant

    Re: Lethal Zanussi F1045w

    If this was a gas appliance and something happened as the last engineer to visit you would be responsible, and heaven forbid, if a fatality occured you would be held responsible!!!! sobering thought!

    cab

    in reply to: Zanuussi IZ141S Wash M/c Pause light Flashing? #193771
    cab
    Participant

    Re: Zanuussi IZ141S Wash M/c Pause light Flashing?

    😀

    in reply to: Zanuussi IZ141S Wash M/c Pause light Flashing? #193769
    cab
    Participant

    Re: Zanuussi IZ141S Wash M/c Pause light Flashing?

    sorry my cryptic message, the email address on your website.

    cab

    in reply to: Zanuussi IZ141S Wash M/c Pause light Flashing? #193767
    cab
    Participant

    Re: Zanuussi IZ141S Wash M/c Pause light Flashing?

    Hi check your in box at repairs@

    cab

    in reply to: Zanussi ZWF1421W fault code #193850
    cab
    Participant

    Re: Zanussi ZWF1421W fault code

    you need to go into diagnostics to check faulty components, search the dta base there should be help on this if not email me and I will pass you the details.

    cab

    in reply to: Zanussi WDJ1294 timer advancing #193766
    cab
    Participant

    Re: Zanussi WDJ1294 timer advancing

    I believe I mentioned b4 but have you checked the auto dry button is closing.
    cab

    in reply to: De Dietrich DTI304B Induction Hob #194066
    cab
    Participant

    Re: De Dietrich DTI304B Induction Hob

    is this new or old, if new there are jumpers on certain models that must be put into the terminal block, if it is old it will be the power board, both sides are independant, you can swop the boards to confirm faults.

    cab

Viewing 15 posts - 256 through 270 (of 423 total)