Forum Replies Created
-
AuthorPosts
-
Criscold
ParticipantRe: Zan Dwasher ZDF 231 PNC 91151904402 service info
You have mail
Criscold
ParticipantRe: WPL AWG349/4
Check airtrap /Level Switch
Criscold
ParticipantRe: Zanussi ZI921/8 FFA. Prod No. 925771721
Unlike the NO FROST refrigerators, in the PARTIAL NO FROST type the cooler and freezer compartments are separated physically.
The battery evaporator cools only the freezer compartment, while the tube evaporator cools only the cooler compartment.
The cold produced by the battery evaporator in the freezer compartment, is distributed by the fan placed behind the screen
A temperature sensor is mounted in the fridge section and controlled by the circuit board
Criscold
ParticipantRe: Zanussi ZI921/8 FFA. Prod No. 925771721
The freezer on this is frost free but the fridge is not, If the unit is running and only getting down to 10 deg I would think that they have a system fault on this one.
Let me know if you req the manual on thisColin
Criscold
ParticipantRe: Zanussi ZI921/8 FFA. Prod No. 925771721
Do you know if the unit is running continuously ?
Criscold
ParticipantRe: Electrolux ESL6114 Dishwasher leaking
You have a fill level pressure switch and an overfill pressure switch mounted on the RH side of the machine on this model.
PM you email and I can send you some info on this machineColin
Criscold
ParticipantRe: whirlpool dishwasher adg7440 11flashes
Fill Problem, You have mail
Criscold
ParticipantRe: whirlpool akz511/1x 858551115000
Hi
Hinges listed as 481241719467
F6 is door lock oc or board fault
Colin
January 7, 2014 at 7:52 pm in reply to: Whirlpool adg7470/1 8542 747 15001 Reset after fault #407329Criscold
ParticipantRe: Whirlpool adg7470/1 8542 747 15001 Reset after fault
Could try entering test program
Press and hold program button for 5 seconds until 4 cycle LEDs light up
Still pressing program button press the start button twice 2nd LED from left should light
Release program button
Service program should now start
Now stored errors will be displayed
After displaying errors ECO led will flash for 10sec and pressing select button should now delete stored errors.Good Luck
Criscold
ParticipantRe: ADG 7470/1 854274715001 Dishwasher Door lock
I will check in the morning for you if no one else has the answer
Criscold
ParticipantRe: ADG 7470/1 8542747481215001 Dishwasher Door lock
It looks like 481241758398
Criscold
ParticipantRe: Beko DWD5410W Dishwasher Lower Door Seal
Hi Jon
Have you checked for a split seam in the lower arm, had one doing the same a couple of weeks ago.
Colin
Criscold
ParticipantRe: Whirlpool AWZ 612 e13
PM your info and will send some info in the morning
Criscold
ParticipantRe: Whirlpool AWM8163 FH fault
Hi Mick
PM your email and I can send some info.
Colin
Criscold
ParticipantRe: sy36 oven
Looking at wiring diagram I think you will find this oven has a TOC in the live feed and looks like it would shut down the display as well, part number C00089573 or wiring on terminal block.
-
AuthorPosts
