Forum Replies Created
-
Posts
-
Re: Original Servis Quartz any out there
most of them still running as customers built their kitchens around its non standard narrow size and are now stuck with them until they have a major Kitchen re fit. Must admit they were rubbish when new but I am amazed at how they have survived so reliably.
Re: Diplomat ABA9242 Hinges required
651000355 1 LEFT FIXED PIN INNER DOOR HINGE
651000356 1 RIGHT FIXED PIN INNER DOOR HINGE
651016862 1 ANTIJAMMING FILTERtry AWI 01603 630258
Re: smeg washing machine
get the customer to kick up a fuss with smeg, they normally do a concession at that sort of age.
Re: Diplomat fan oven
assuming its a fan oven and the fan and element are working then its probably not at fault. If its the small under counter double oven then that is pretty much as good as it gets. Need to pre-heat for a good 30 mins before cooking to get anything like the correct temperature despite the stat cycling off and on. Used to get loads of complaints like this back in the MFI days, customer usually got the hang of it in the end.
Re: smeg washing machine
probably a Gorenji made machine, must admit to only ever seeing one of these before.
Re: connects parts specification message
When changing the carbon brush it is suggested that both carbon brushes are changed
Re: Smeg D/W Dead
jim, its p/n 816290885 retail price 138.59 +vat. dont normally get completely dead ones but sounds like the fault in your case.
see you pm’s.Re: Door seal lip repair?
its due to the increase in the size of the doors. more chance of the piled up washing inside falling forward and getting trapped un noticed between glass and rubber, the first turn of the drum and it snatches the item free and causes the damage. Probably the only reason I change door seals these days (or mouldy ones I guess) as they dont seem to get the rotten holes in them anymore.
Re: SMEG Cooker Circuit diagram SUK91 cmx5
Pretty normal for smeg to have loads of wires hanging like that, does not mean it has to go somewhere. check your email.
Re: APM8552/2 i/a/w
dont want to state the obvious but you have not mentioned the air bell…… have had the odd timer (516010301) related no spin fault but sounds like a dead cert module problem to me.
Re: ISE 10 tumble dryer
get the gen one Jim, no place for a dodgy nastypart length of knicker elastic,
