Forum Replies Created
-
Posts
-
Re: Top viewers
Alex and I out of the top 10…. we can all see who is doing the real work, unlike Robdray who seems to have too much time on his hands 😉
Re: Help Please!
and your excuse for this unproffessional practice? 😆
I, like you assumed they were only relay contact wires and were un important. There was a panasonic microwave that used to catch me out too in the same way.
Re: No info on replacing stats on Hotpoint washer dryer
Not so familliar with this model but the black stat is in fact a thermistor while the other one is a one shot stat that may have tripped because it got too hot. To change this one does involve a strip down of the heater box which is really a job for an engineer who will also be able to find out why it may have failed in the first place. Would have thought that appliance will be under a 5 year parts warranty still.
Re: Hotpoint 6240W
mutley wrote:hi
have seen a couple of these and from memory they are exactly the same as a normal hotpoint w/d but jazzed up to be integrated, they achieved four leg suspension by bolting a lump of angle iron to the normal susp mounting point and then fitting two legs to this each side.hope that of use to you
john
spot on there John, just for those of you who have never seen one of these here is a couple of pics:
Note the position of the valves and the sides that just flop down out of the way.
The ‘angle iron’ the great thing about this is only having to undo one bolt each side rather than flaff about with suspension rods etc.
Re: Help Please!
Goose, you know the 2 seperate wires on the board with spade terminals, have you got them back the correct way round? Did a wma tub the other day and I didnt 😳 and had similar sympthoms. My excuse, it was a very poorly lit outhouse on a freezing late afternoon.
Re: Hotpoint CDT00P
That is basicly just an updated version of a dryer that has been manufacured for many years. No real problem faults with them and its rare we ever change a jockey pulley, even on old ones.
Did it not come with a 5 year parts warranty? Most Hotpoints do/did. would have only saved you the £3.00 though.
Try our repairs@ service next time as most of us charge way below the rate that Hotpopint do.Re: ISE Stock arrival to agents
Deliveries seem to be turning up at any time, no warning and delivery instructions ignored. I know we cannot expect an exact time but the day at least would have been nice.
Re: Smeg A 42 driving me mad!!!
Had a few oven fan motors lately causing tripping on those (despite meggerring OK), cannot imagine how it would do it on switch off but stranger things have happenned.
Re: Agent Numbers & Other Stuff
I got it but the agent number is longer than the one I have already been given the original was three didgets while this one is two – two.
Re: Diplomat fan oven slow to heat up
can you see the fan running at the back of the inside of the oven? This model has a noisy cooling fan also which you may hear running.
Re: Miele G522 dishwasher not heating, sticks during wash cy
many older Miele’s have a high pressure pressure switch that prevents the heater from coming on if the circulation pump has failed. The tube leading to this and the switch itself often gets blocked up with grease preventing it from operating, hence no heat. I cannot tell if your model has this or not and its not really a diy job. Power off before looking.
Re: Referrals?
kheath wrote:From me…..handed them out Saturday morning.
Will put some in the post to you tomorrow.
KevinI assume there is some more detailed stuff on its way?
Re: Bosch WFT2806/GB13 FD8306 400287
RocketMan wrote:Help 😥
Initial complaint – no drum action but fills and empties ok.. new motor fitted … still fills and empties ok, but still no drum action…new power module fitted… fills .. erratic drum action (eg agitation is too fast…lasts for about 3-5 mins them stops)….
when put onto spin…doesn’t ramp up to full spin….
Any ideas??? ❓ ❓ ❓ ❓
was it the correct motor? some of those use a different Tacho set up which could cause those problems. Post the part number.
