Forum Replies Created
-
Posts
-
Re: Bosch SGI5305GB/13 FD 7912 Dead
do it mallc, point out its an intergrated and will cost a fair bit of cash and hassle to replace. If you are getting a feed to the board, it has to be that. only six years prob since they bought it, not really what we would class as old. Make sure you make a decent wedge for yourself too.
Re: Neff fan oven elements
to what? had some last week still on that part number. now at £34.70 before discount.
Re: Timer Controls on Cannon Double Oven 10287
Its a major strip down, wouldnt recommend you try and being Gas you will need a corgi engineer.
Re: Miele fridges?
Just think we should point out that Miele dont actualy make their own refrigeration products. they are sourced from another manufacturer, still a good quality product though.
Re: indesit bearings
They list one of the spiders as 26mm so I guess that is the one The spider complete is only £30 odd from electrue p/n:C00074213.
the bearings on their own are: C00013563 (6205 ZZ type) C00044765 (6206 ZZ) and the seal C00082696. Its pretty damn confusing so dont blame me if these are wrong! i would remove spider and knock out the bearings before ordering and check they are the bearing numbers as above. If masterpart or whoever list 2 kits, buy em both just to be safe.
reminds me of the days of indesit spiders when we had to measure the distance between the centre of the mounting bolts and the centre pulley hole. Why can they not give a different model number to machines with such a major engineering differrence.
is it worth it?Re: AEG 61300-W washing machine spinning problem
sounds like its almost doing a delicate spin, checked the swtich bank and connections?
Re: CREDA 49802 Cooker
between the others, it sits at 90 degree so the tags and wires are hard up against the regualtors/ stat either side.
Shame no one made a pattern of this a few years ago as a lot perfectly sound cookers have been scrapped just for this.Re: indesit bearings
indesit, being indesit, require you to measure the diameter of the drum shaft to get these bearings correctly………
Re: CREDA 49802 Cooker
Is this the Creda topline with a eye level small oven? I have tried that stat and it doesnt fit.
How can I “unsticky” a post? I tried to do that to the AEG config code post in trade tech but couldnt work out how.
Re: AEG L74630 UPDATE CONFIG CODE?
Had the same problem some while back, luckily in that case i was able to read the code programmed into the old board (which I had to re-fit). If your board is totaled or dead then I am not sure what to do.
Re: water filters for samsung side by side f/f
before Martin tells you off…..CAPS LOCK OF PLEASE!
welcome to the forum by the way.Re: GDA BF41
its a valve 1801538 and the seals are:1801539 large and the 2 o rings are1801552. 1801547 is the new spray arm which should cure the other fault.
Re: water filters for samsung side by side f/f
try this lot:
http://www.uk-fridge-filters.co.uk/did try them for trade discount some time back but they wanted high quantity.
