[eastlmark]

Re: Bosch 498607 tumble drier elements

Well, 3 years on and whats changed? Nothing.
I have been happily fitting Masterpart elements since the debacle above but find they are out of stock and as I needed one urgently I ordered the genuine article and even ordered a second for stock. Will be fine, obviously they have sorted this issue by now…….
What do you think the answer to that is? Both have earth faults, (around 3.2 m when cold which falls to 0.01m when hot) exactly the same as before and yes I have tried “burning them off” with no success.
Anyone know of a source of pattern ones with stock?

[eastlmark]

Re: Smeg On/Off switch??

iadom wrote:It is only a recent machine, 3 or 4 years old at the most. Console is 763739863, listed at Masterpart as out of stock but around £25.00

However the console is not at fault, it was the P (programme button) that had vanished.

Fault is a broken led/light guide part number 769350131.
Black plastic door handle is also broken.

Thanks again to Lawrence for the pdf. 8)

just in case you haven’t already found out, re 769350131….

PCB SUPPORT ALSO ORDER 764730267 X 1 WITH THIS

[eastlmark]

Re: Smeg A42.5

If its a twist on motor then you need:
795210620 + 039290137 & 902610342

before 2005 is listed with 699250044 but now obsolete
its a minefield out there by the way, and some need mounting bracket, the part number I cannot find at the mo, hopefully you wont need it.

[eastlmark]

Re: Viceroy dishwasher

expertcat wrote:That’s all I’m seeing on vestel dishwashers occasional pcb blocked drain pump but mostly wiring loom failures

not surprising given the razor sharp edges….don’t they ever learn?

[eastlmark]

Re: 044746 Phone No: ???

all UK numbers are 44…. its just we don’t use the national code in the same way as you don’t use your local code when calling a similar local number (on a land line). Think you will find most texts are sent with the +44 prefix.

[eastlmark]

Re: Viceroy dishwasher

r600a wrote:http://www.wrenliving.com/kitchens/appliances

Distributed by this lot I believe .

What’s the fault code you’ve got ?

Bryan

F or E 4 according to customer but machine dead by the time I got there, as I said, every wire in the loom either broke or cracked, customer getting going to scrap it.

[eastlmark]

Re: Britannia Bought?

DrDill wrote:I thought they has closed blackpool and moved it all to prescot, thats why its a mess!

yes that’s right but its this week its happened.

[eastlmark]

Re: 1606 bearing changes

usual issue is due to both bearings being the same. the shaft then needs to be pulled through 2 bearings as opposed to one on most other makes.

[eastlmark]

Re: miele wt745

you wont want to know!
Fan is belt driven from a separate motor so its either a motor (unlikely to fail) or a fan unit- a bit like a Zanussi/Electrolux set up. Most likely to be the fan covered in crap or I have had the mounting bracket for the fan motor break. I think you need to take a look at this one first. If the condenser unit needs removing its not a job for the feint hearted!

[eastlmark]

Re: Smeg S20XMF-8 Timer

white display is 816291321
green display is 816291243
can fit white to a green one but best not do visa versa

[eastlmark]

Re: 1606 bearing changes

how easy did the drum shaft slide out of the old bearings John?

[eastlmark]

Re: Britannia Bought?

seems the hsit has really hit the fan over at Blackpool this week. Complete disarray in the spares dept.

[eastlmark]

Re: A O

Due to their adverts, persons of a certain age and well spent youth absolutely hate AO….

[eastlmark]

Re: Miele water system de activated

Cras wrote:Customer rang this morning saying they had cleaned filter but machine has come up with water system de activated I read somewhere that you need Miele service to clear this code is this true or could it be something more simple. ? The machine is two years old thanks Cras

probably have filled the base with water when doing the filter, needs drying out and then will re set on its own. Unless its a new one on me that is.

[eastlmark]

Re: Miele T284 tumble dryer

Its always that relay board at the back in my experience, it may look fine. If it has 3 rectangular relays on it then its the old style and will be the cause of no heat, the new version has 4 square relays and is far more reliable. I have replaced the relays on one of the old boards which I use for testing or temp use while the correct one is ordered but it was a bit of a trial due to the double sided soldering and I wont bother again. Don’t expect any change from £100 quids though. 😯

[Author]

Posts