[electrofix]

Re: Beko DCU6130W not heating but should be

do not rely on neon srewdrivers they are a good guide that’s all. element needs a live and a neutral to work so if you get all lives it wont

common fault on these is the thermistor on the heater fails and it stop heating. I have a hotpoint heater one in my pocket for test purposes but the actual one is only available with the heater.

to test it you need to measure its resistance to see if it to low. just measure a hopoint one and I am getting 14000 ohms at current room temp

Dave

[electrofix]

Re: Replacing door handle on Samsgun Washer Dryer

can see it more clearly now
have you tries putting door back together as it looks like the door outer pushes the spring arms to tension it

Dave

[electrofix]

Re: Replacing door handle on Samsgun Washer Dryer

judging by these pictures. it shows the spring clipped into the door handle. if that is correct mechanically there would have to be a second spring pushing the door handle down when the door is together
Have you got another spring ?

Dave

[electrofix]

Re: miele g611sc base filling up

its only a guess here as i cant get info for miele and i would have to see the machine
but
are these tubes an overflow for the wash tub, if yes its either

overfilling or the door seal is letting water splash through

Dave

[electrofix]

Re: APM8703/2

cant see it properly but it looks like a merloni built machine. have had the back on this move round and put things out of line without leaking, look at other things round the rear to see if it looks like it moved. A big give away is normally the heater as it twists out of line

Dave

[electrofix]

Re: Beko DSC64W condenser sensor dryer

have sent you a pm

Dave

[electrofix]

Re: Smeg Hob SE661x1 ceramic

since they are simple simmerstats it sound like you have a connection wrong
check all the wires out using the other units as a guide
pay particular attention to the load and live connection

Dave

all the pictures I can find are identical to original units so wires should not move

[electrofix]

Re: Bosch Int’ DW pump p’num’

you can find gen numbers here

http://www.bosch-home.co.uk/store/spareparts/search

using those number i get cross ref pmp273

Dave

[electrofix]

Re: energy reg 33er9mht

not exactly but the conversion should still work the only one that can be a bit different is the pilot light circuits

Pilot = S
Line = P1
LoadA = 2
Neutral = P2
LoadB = 4

if in doubt post a picture of both units so we can see terminal labels

Dave

[electrofix]

Re: Zanussi zwg7120k filter

there are 19 machines with the same model so cannot be accurate. would need the Pnc number to tie it down

If there is a filter it will be between the tub and the pump. find the pump and trace the pipe back. have even seen pumps and filters mounted on the bottom of the tub

Dave

[electrofix]

Re: energy reg 33er9mht

does this not help

diamond-wiring-reference-t13199.html

dave

[electrofix]

Re: Bosch WFT2800 filter access

cant find this model on bosch there seems to be an LG with similar number

but

if the filter wont unscrew more than half a turn it means there is a hairclip or something like jamming it. to clear it you will have to take off the hose from the drum to the filter and remove the obstruction to enable it to be extracted

Dave

[electrofix]

Re: £358 washing machine costs £1092

one heck of a rip off as are these payday lending companies.

they are not helping their clients but forcing them into more debt and poverty

Dave

[electrofix]

Re: Electrolux (Crosslee) dryer timer.

mad isn’t it we all know who makes it but both sides seem to be disowning it
you could always give crosslee a ring and see what they say

but chances are the timers are the same but you just cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}

according to Qualtex 52841 timer changes number to
421309242661
and they show stock at around £22

Dave

[electrofix]

Re: Electrolux (Crosslee) dryer timer.

tds shows TDV850W pnc 94900060000

timer for that model is 5026 19 72-00 / 9

also if you look up above number in connect it cross refs to the timer in the white knight site for the model starting 0312

Dave

[Author]

Posts