electrofix

Forum Replies Created

Viewing 15 posts - 16,786 through 16,800 (of 19,550 total)
  • Author
    Posts
  • in reply to: Curry’s Essentials (CDW60W13) filling & emptying #431885
    electrofix
    Moderator

    Re: Curry’s Essentials (CDW60W13) filling & emptying

    if you now remove the botton panel does it work properly again ?

    Dave

    in reply to: aeg t56840l dead pnc 916096476 #431926
    electrofix
    Moderator

    Re: aeg t56840l dead pnc 916096476

    about the only thing you can fix on the board is the power supply. find the 12v side of the supply and measure it. if its there or comes and goes then board scrap. if no output may be the chip

    Dave

    in reply to: fagor microwave/grill stuck on demo #431770
    electrofix
    Moderator

    Re: fagor microwave/grill stuck on demo

    look in her instruction book if she has it or do a search for it online

    Dave

    in reply to: AEG Favorit 350 20 VI #431759
    electrofix
    Moderator

    Re: AEG Favorit 350 20 VI

    my first idea is always the water solenoid. its a 240v valve coil so should read about 5k ohms or so.

    appliance will be trying to fill. if it fails within a certain time it dispalys a fault code and stops

    Dave

    in reply to: fagor microwave/grill stuck on demo #431768
    electrofix
    Moderator

    Re: fagor microwave/grill stuck on demo

    dont know what you have seen but found this

    How to put & take off DEMO Mode on DeDietrich and Fagor cooking appliances.

    To put on DEMO or take off DEMO.

    the clock must be set to 0000 for this to work, to set clock, press button with clock symbol

    then using the – or + adjust time to read 00H00, then press ok.

    now within 10 seconds of setting the time you first press and hold the – (minus) button then while holding the – button press and hold the + (plus) button, continue to hold both buttons until you hear a long bleep (approx 10 seconds) and the demo word will appear, you use the same method to take off DEMO.


    also

    page 28

    http://www.fagor.com.my/files/download/ … 256{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}29.pdf

    if i knew model may have got more info

    Dave

    in reply to: Indesit IWDC6125S Drying Query #431704
    electrofix
    Moderator

    Re: Indesit IWDC6125S Drying Query

    weird

    only seems to do it when the motor is turning

    not hit that one before but is has to be either board or motor. no much else left

    Dave

    in reply to: Indesit IWDC6125S Drying Query #431702
    electrofix
    Moderator

    Re: Indesit IWDC6125S Drying Query

    all washer dryers use a small amount of water but the only time i have what you are descibing is when the motor brushes are sparking on spin

    machine is a load of junk get rid of it and buy a Bosch

    Dave

    in reply to: Revisiting good old Vinyl. #431024
    electrofix
    Moderator

    Re: Revisiting good old Vinyl.

    still rememeber where the 7 inch single turned over on American pie everytime I hear it lol

    part 1 on side A part 2 on side B. Was much better when I bought the LP


    Dave

    in reply to: Revisiting good old Vinyl. #431022
    electrofix
    Moderator

    Re: Revisiting good old Vinyl.

    got a 50 watt valve amp in the attic that really makes them sound good .

    not used it for a while though.

    got over 2000 singles and over 100 albums of various artists but not played them either. the convenience of digital wins

    Dave

    in reply to: This will please the recon appliance guys #431037
    electrofix
    Moderator

    Re: This will please the recon appliance guys

    the day they started sealed tubs was the day recons ceased to be viable

    Dave

    in reply to: Rangemaster Kitchener 110 Ceramic #430982
    electrofix
    Moderator

    Re: Rangemaster Kitchener 110 Ceramic

    bridge the clock if you can. that way it cant be the clock if it still does it

    Dave

    in reply to: bosch waq28461bg/12 #430995
    electrofix
    Moderator

    Re: bosch waq28461bg/12

    this has got to be a main board fault. with all the lights going out sounds like the board either crashes or runs out of power

    have you tries just a rinse cycle? sometimes with power problem machines will run a rinse cycle because it does not need to activate heater or soap box but fail on anything else

    Dave

    in reply to: Gas oven lights ok but turns off #430838
    electrofix
    Moderator

    Re: Gas oven lights ok but turns off

    its prob more like is the part still available. sounds like the thermostat but not certain dont do gas. try to check up what parts are available first

    Dave

    in reply to: beko wmb91442 #430234
    electrofix
    Moderator

    Re: beko wmb91442

    sorry dont know

    Dave

    in reply to: Qualtex and WTA #426390
    electrofix
    Moderator

    Re: Qualtex and WTA

    try to get some concessions on p&p levels even if its £90 for free p&p it would help

    to help with remembering the order time i have now installed
    http://freealarmclocksoftware.com/

    works well set it for 2:30 pm every weekday

    saves me going oh “heck” or other 4 letter words when i miss the deadline by 5 mins

    Dave

Viewing 15 posts - 16,786 through 16,800 (of 19,550 total)