[electrofix]

Re: beko american f/f fault

would need commercial code and model number to look it up

Dave

[electrofix]

Re: Miele WT 2670 Fault F4

as far as i can see F4 seems to relate to the tumble dryer side of the machine and has to do with the air flow temp sensor

could be as simple as a broken wire

hope this helps

Dave

but dont forget to unplug before you look

[electrofix]

Re: Wirlpool Dishwasher Fault

sounds like the circulating pump motor may be at fault

if you listen very carefully you may hear a faint hum but sometimes you cant hear that
you would need to check if power is getting to the motor when it goes quiet.
if this motor has failed the retail price is over £100 plus vat

Dave

[electrofix]

Re: beko drvs62w

let me have your email will send you some tech docs that may help

Dave

[electrofix]

Re: Creda W100FW interlock replaced, machine dead

i assume when you put the old lock in even without the machine turned on at the plug the door latches and wont open

if thats the case when the lock blew it also blew one of the tracks on the pcb on the timer
this is fixable with a soldering iron and time and patience. follow the cable from the n connector on the door lock onto the timer to find problem. you will have to remove timer to sort it

make sure plug is removed before you open the lid

Dave

[electrofix]

Re: Belling XOU177 oven

lots of links to this if you search google

1 old ebay listing ( but cant say he is correct ) with lots of other models to search and cross ref
http://www.ebay.co.uk/itm/Cooker-Oven-T … 0739796978

also Espares page lists as obsolete but 2 other part numbers listed

http://www.espares.co.uk/part/cookers-a … ostat.html

hope it helps

Dave

[electrofix]

Re: Neff U1661 main oven not working – controller or thermos

one of the problems with blowing fuses through printed circuit boards is some of the damage may be unseen.
from an engineering point of veiw my first search would be the component that controls the fan. this may be a relay with welded contacts which is easy to replace. the error on the board may be it senses the fan is running before it turns it on
as far as an enginner is concerned you could look in the find an enginner section of this website
you could ask

http://www.qualityelectronicrepairs.co. … d-z_1.html

and see if they repair your board

Dave

[electrofix]

Re: Essentials WM002

think its a Hiar but dont quote me

its one of currys cheap rubbish for the masses
if all else fails currys should supply the part albeit at their prices

Dave

[electrofix]

Re: bosche w/m wae24162

its not uncommon for slight earth faults on the heater to cause problems like this have you checked it

will it do a spin only or will it do the same thing ?

Dave

[electrofix]

Re: tkl9060 sump hose

thanks

dave

[electrofix]

Re: Diplomat ALT 5751

fan oven

fan runs all the time element goes on and off with the thermostat

fan grill

grill element stay on till it reaches temp. then element switches off and fan turns on

if that not what you are doing you must have a wiring error or a switch failure

dave

[electrofix]

Re: Anyone know anything about these ? manufacturer etc ?

jimca007 wrote: ” you can get one for 160 from tesco mum “

and you will get to know the service engineer when he visits weekly lol

Dave

[electrofix]

Re: Tecnik Top Oven/Grill – 058587098

a lot of ovens have a cooling fan that cuts in as the unit gets hot. if yours has and it does not cut in an overheat stat cuts in and shuts everything down 4-5 mins sounds about right

Dave

[electrofix]

Re: Whirlpool ADG 7550 won’t start

if the lights go out before the door clicks shut itr may well be a wire broken
dishwashers have a habit of breaking the wires at the bottom of the door where the wires exit the door panel and enter the base

Dave

[electrofix]

Re: Diplomat ALT 5751

sound like you have got the oven on the fan grill setting not the fan oven setting where the fan runs all the time

Dave

[Author]

Posts