[electrofix]

Re: Convert White Knight Gas tumble dryer?

you would have to ring white knight in huddersfield (crosslee) if it can be converted would only be a jet change and would have to fitted by a gas safe fitter

Dave

[electrofix]

Re: Hotpoint WT540 Flashing lights again

fault code relates to a pressure switch problem its either a blockage or faulty pressure switch but !
i have had this fault due to a faulty pcb on at least 2 occasions
you may need to get a quote to fit a recon pcb from a local engineeer

Dave

[electrofix]

Re: w’pool top loader (3rlsq8000)

no drum has no seal a top does not need one

Dave

[electrofix]

Re: ghd straighteners

its a fake throw it away cant be repaired and if you could is a health and safety risk

b stands for black yours is pink well fake

sorry

Dave

[electrofix]

Re: ghd straighteners

1st thing what model and colour is it

2nd are they fake lots of them around

have fixed quite a few will help if i can

Dave

[electrofix]

Re: Hoover Oph7174D E03 fault help please

would check cold valves first old hotpoint used to do this when cold valve failed
second check pressure switch unit if it is not dropping out machine will sense this

Dave

[electrofix]

Re: Miele pump handle :/

i got a broken one of those

its not really a pump handle more like a drain valve handle miele describe it as a pulley and that threw me

miele part only. order from miele but they are very quick and they have stock

Dave

[electrofix]

Re: Hoover Oph7174D E03 fault help please

you dont say exactly how fault transpires but have you checked water and valves ?

Dave

[electrofix]

Re: ignis 348 motor and press switch

yes motor will fit no probs motor plug fits ok there is an earth wire on old motor not connected that need to be put on and you will need 2 small self tap screw to lock motor in on rear panel the only problem is those stupid hose clips

Dave

[electrofix]

Re: Zanussi Diagnostics

this column of lights 8 in all make up the binary code of the fault condition

top 4 digit 1
bottom 4 digit 2

convert the lights from binay to decimal and read fault code

if not sure post the lights from top to bottom i will work it out

info is on page 43 onwards on tds manual

hope this helps

Dave

[electrofix]

Re: Bosch SGS43A18GB/27

checked bosch website and this is correct part number but they show alternative number of 489607

also put 482935 into qualtex and they listed 489607

which part number have you fitted ?

is 489607 a pre programmed unit

any bosch experts out there ?

Dave

[electrofix]

Re: Cooker Hood

dont know who makes this but what wrong with it there may be other ways around the problem

Dave

[electrofix]

Re: zanussi dryer tce7127w

have you checked power at the motor ?

capacitor ?

etc

Dave

[electrofix]

Re: FLE1115w no spin

the time would only be a factor if the pressure switch was blocked

still sounds like an oob problem they may be light but if they are in a lump they may tip the oob cut out

just a thought

after 20mins water drips out clothes are lighter and may then spin

Dave

[electrofix]

Re: Blomberg 1501AAA worth fixing?

machine was imported by comet most spares come through them but they are not cheap

Dave

[Author]

Posts