[electrofix]

Re: hotpoint wm75

there is a quick user guide for wm72 looks like a similar machine
know the machine now forgot about this one.
Had one with a pump problem turned out to be driver chips on the front pcb

Dave

[electrofix]

Re: Newpol washing machine

as far as i can remember Comet used to import Newpols and all spares came through them

you could try http://www.newpol.es

cant get spanish but if you can email them

Dave

[electrofix]

Re: hotpoint wm75

as far as i kmow this machine has no error codes so you wont see any

apart from electronics is a fairly basic machine if it sticks somewhere work out what it thinks its doing any find out why its not

Dave

owners manual from hotpoint site

http://www.hotpointservice.co.uk/hs/pag … lSearch.do

[electrofix]

Re: commercial ice machine

suggestion
get the customer to ring up and complain suprising how they move if they think they are losing a potential cumstomer or his business contacts

Dave

[electrofix]

Re: whirlpool top loader(gearbox)

no one as far as i know no enough demand for service

get my boxes from asd they normally have stock

Dave

[electrofix]

Re: hotpoint wm75

as a quick check have you tried filling machine on 40 degrees then setting to 60 degrees see if machine stops

agree with above first check hot water supply and valve

Dave

[electrofix]

Re: diplomat d/w adp8322

yes light continually flashing with no break is 1 flash and therfore ntc fault

i have had the same thing got 1 flash changed ntc no change i keep 1 to try now as a test

Dave

[electrofix]

Re: Servis M6852 start button

my first thought would be the start switch

take panel out use ohm meter and check switch operation may be intermittant

look for bad solder joints around switch etc

hope this helps

Dave

[electrofix]

Re: app6302

what make is on it ?

[electrofix]

Re: W/Knight 767C Cond T/Dry – overheating

go in from rear

those fans rust on most of the time its a smash it off job and fit a new one

Dave

[electrofix]

Re: H/point UD47 Cooker – Main Oven Lamp Asy

typed model into Qualtex
they came up with part no you had plus

C00199517

picture looks the same but may be an error check out this part number

may or may not be right so dont take as gospel unless someone else can confirm

Dave

[electrofix]

Re: Hotpoint TVM562G

stats may have tripped so no heat

capacitor may have gone so no motor just a faint buzz that customer may not hear

i would take stat kit an cap and take it from there

Dave

[electrofix]

Re: Receipts & Invoices

dont know about anyone else but i avoid giving reciept like the plague

if i give them out have to keep copies for 7 years for revenue

if they want a reciept i have a rubber stamp and it is a cash reciept only single copy no duplicate

i have official invoices for bigger clients but no test data just job done dates and price

i keep record cards for jobs so i know whats been done for guarentee puposes etc

Dave

[electrofix]

Re: Candy CDC266 Dryer

my first question is how do you know the heater is only on for a few sec ?

from what i can read you have replaced everything exept the timer

if all covers are on then it has to be an airflow problem assume you have checked condensor etc

run it with the door open for 5 mins and see what happens when air is not recirculated

hope this helps

Dave

[electrofix]

Re: Hoover Junior 1346 bearing problems?

clean with petrol !!

can you imagine the health and safety uproar if they suggested that now lol

Dave

ps still got the hoover grease gun athough gathering dust these days and used to use washdog as my cb handle those were the days

[Author]

Posts