Forum Replies Created
-
Posts
-
as far as i can see thats not listed as a fault code
you owners manual lists all thats available but just does not say
4 is heater fault
5 is heater Thermistor fault
6 is front Thermistor faultDave
not said much but have read and horrified by the lack of help from a major manufacturer. cant understand why there is no compensation for the kitchen.
Also cant help thinking you may have a case for compensation in the small claims court as it was there faulty appliance that caused itas for Don lets ask him
[USER=”125″]don[/USER] and comments
wish there was someone at miele that could see this post
you could try writing to miele as your more likley to get it read by someone who could do something
there were cases years ago with indesi and hoover i think where the badly made inner drums exploded on high spin so its not a new problem but never heard of it before with miele
Dave
go this poss test prog for this one
k test programme for this is make sure door is closed turn the dial clockwise 8 positions press and hold button nearest to dial and turn to position 9 release button and it should show errors if any and should show p09.
turn the dial anti clockwise start at position 1 this is test for motor and fan
p2 is the compressor test need to check that it’s pulling about 350 within the test
P3 is pump test and that’s all you can test, hope thus info helps this applies to most bosh Siemens dryers
originally posted by Kaiok there is ver little heat in a heat pump dryer. All you get is waste heat from the compressor
have you checked air flow and is the condensor getting cold ?
Dave
when you punch in the serial numbers it gives
2976680600 for the heater
and
2975778101 for the main boardDave
